lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND V6 2/2] clk: imx: scu: add cpu frequency scaling support
Date
On NXP's i.MX SoCs with system controller inside, CPU frequency
scaling can ONLY be done by system controller firmware, and it
can ONLY be requested from secure mode, so Linux kernel has to
call ARM SMC to trap to ARM-Trusted-Firmware to request system
controller firmware to do CPU frequency scaling.

This patch adds i.MX system controller CPU frequency scaling support,
it reuses cpufreq-dt driver and implement the CPU frequency scaling
inside SCU clock driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes compared to last version, just redo patch based on clk-next to fix patch conflicts.
---
drivers/clk/imx/clk-scu.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index f460526..34c7cdf4 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -4,12 +4,17 @@
* Dong Aisheng <aisheng.dong@nxp.com>
*/

+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/arm-smccc.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/slab.h>

#include "clk-scu.h"

+#define IMX_SIP_CPUFREQ 0xC2000001
+#define IMX_SIP_SET_CPUFREQ 0x00
+
static struct imx_sc_ipc *ccm_ipc_handle;

/*
@@ -180,6 +185,23 @@ static long clk_scu_round_rate(struct clk_hw *hw, unsigned long rate,
return rate;
}

+static int clk_scu_atf_set_cpu_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_scu *clk = to_clk_scu(hw);
+ struct arm_smccc_res res;
+ unsigned long cluster_id;
+
+ if (clk->rsrc_id == IMX_SC_R_A35)
+ cluster_id = 0;
+
+ /* CPU frequency scaling can ONLY be done by ARM-Trusted-Firmware */
+ arm_smccc_smc(IMX_SIP_CPUFREQ, IMX_SIP_SET_CPUFREQ,
+ cluster_id, rate, 0, 0, 0, 0, &res);
+
+ return 0;
+}
+
/*
* clk_scu_set_rate - Set rate for a SCU clock
* @hw: clock to change rate for
@@ -312,6 +334,14 @@ static const struct clk_ops clk_scu_ops = {
.unprepare = clk_scu_unprepare,
};

+static const struct clk_ops clk_scu_cpu_ops = {
+ .recalc_rate = clk_scu_recalc_rate,
+ .round_rate = clk_scu_round_rate,
+ .set_rate = clk_scu_atf_set_cpu_rate,
+ .prepare = clk_scu_prepare,
+ .unprepare = clk_scu_unprepare,
+};
+
struct clk_hw *__imx_clk_scu(const char *name, const char * const *parents,
int num_parents, u32 rsrc_id, u8 clk_type)
{
@@ -329,6 +359,10 @@ struct clk_hw *__imx_clk_scu(const char *name, const char * const *parents,

init.name = name;
init.ops = &clk_scu_ops;
+ if (rsrc_id == IMX_SC_R_A35)
+ init.ops = &clk_scu_cpu_ops;
+ else
+ init.ops = &clk_scu_ops;
init.parent_names = parents;
init.num_parents = num_parents;

--
2.7.4
\
 
 \ /
  Last update: 2019-02-22 03:32    [W:0.119 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site