lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/6] ARM: dts: am4372: switch to use phy-gmii-sel
Date
Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/am437x-l4.dtsi | 17 +++++++++--------
arch/arm/boot/dts/am43x-epos-evm.dts | 5 +----
2 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index ca0896f80248..85c6f4ff1824 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -280,12 +280,6 @@
#size-cells = <1>;
ranges = <0 0 0x4000>;

- phy_sel: cpsw-phy-sel@650 {
- compatible = "ti,am43xx-cpsw-phy-sel";
- reg= <0x650 0x4>;
- reg-names = "gmii-sel";
- };
-
am43xx_pinmux: pinmux@800 {
compatible = "ti,am437-padconf",
"pinctrl-single";
@@ -300,11 +294,17 @@
};

scm_conf: scm_conf@0 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;

+ phy_gmii_sel: phy-gmii-sel {
+ compatible = "ti,am43xx-phy-gmii-sel";
+ reg = <0x650 0x4>;
+ #phy-cells = <2>;
+ };
+
scm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -555,7 +555,6 @@
cpts_clock_shift = <29>;
ranges = <0 0 0x8000>;
syscon = <&scm_conf>;
- cpsw-phy-sel = <&phy_sel>;

davinci_mdio: mdio@1000 {
compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
@@ -572,11 +571,13 @@
cpsw_emac0: slave@200 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1 0>;
};

cpsw_emac1: slave@300 {
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2 0>;
};
};
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 4ea753b3ee43..9dfd80e3b76e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -584,10 +584,7 @@
&cpsw_emac0 {
phy-handle = <&ethphy0>;
phy-mode = "rmii";
-};
-
-&phy_sel {
- rmii-clock-ext;
+ phys = <&phy_gmii_sel 1 1>;
};

&i2c0 {
--
2.17.1
\
 
 \ /
  Last update: 2019-02-20 16:27    [W:0.081 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site