lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 1/4] dt-bindings: fsl: scu: add thermal binding
Date
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
system controller, the system controller is in charge of system
power, clock and thermal sensors etc. management, Linux kernel
has to communicate with system controller via MU (message unit)
IPC to get temperature from thermal sensors, this patch adds
binding doc for i.MX system controller thermal driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since V6:
- put "imx,sensor-resource-id" property in thermal zone nodes.
---
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 72d481c..ad96881 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -122,6 +122,27 @@ RTC bindings based on SCU Message Protocol
Required properties:
- compatible: should be "fsl,imx8qxp-sc-rtc";

+Thermal bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible : Must be "fsl,imx-sc-thermal";
+- tsens-num : Total number of thermal sensors supported;
+- #thermal-sensor-cells : Should be 1. See
+ Documentation/devicetree/bindings/thermal/thermal.txt
+ for a description.
+
+Required properties for thermal zone nodes:
+- imx,sensor-resource-id : This property should be defined in each thermal zone
+ of thermal-zones node, it passes each thermal zone's
+ resource id for thermal driver to get temperature via
+ SCU IPC.
+
+ For thermal zone nodes, please refer to below binding
+ doc for details:
+
+[1] Documentation/devicetree/bindings/thermal/thermal.txt
+
Example (imx8qxp):
-------------
lsio_mu1: mailbox@5d1c0000 {
@@ -168,6 +189,12 @@ firmware {
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ tsens: thermal-sensor {
+ compatible = "fsl,imx8qxp-sc-thermal";
+ tsens-num = <1>;
+ #thermal-sensor-cells = <1>;
+ };
};
};

--
2.7.4
\
 
 \ /
  Last update: 2019-02-20 07:55    [W:0.066 / U:2.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site