lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: xen/evtchn and forced threaded irq
From
Date
Hi Boris,

Thank you for your answer.

On 20/02/2019 00:02, Boris Ostrovsky wrote:
> On Tue, Feb 19, 2019 at 05:31:10PM +0000, Julien Grall wrote:
>> Hi all,
>>
>> I have been looking at using Linux RT in Dom0. Once the guest is started,
>> the console is ending to have a lot of warning (see trace below).
>>
>> After some investigation, this is because the irq handler will now be threaded.
>> I can reproduce the same error with the vanilla Linux when passing the option
>> 'threadirqs' on the command line (the trace below is from 5.0.0-rc7 that has
>> not RT support).
>>
>> FWIW, the interrupt for port 6 is used to for the guest to communicate with
>> xenstore.
>>
>> From my understanding, this is happening because the interrupt handler is now
>> run in a thread. So we can have the following happening.
>>
>> Interrupt context | Interrupt thread
>> |
>> receive interrupt port 6 |
>> clear the evtchn port |
>> set IRQF_RUNTHREAD |
>> kick interrupt thread |
>> | clear IRQF_RUNTHREAD
>> | call evtchn_interrupt
>> receive interrupt port 6 |
>> clear the evtchn port |
>> set IRQF_RUNTHREAD |
>> kick interrupt thread |
>> | disable interrupt port 6
>> | evtchn->enabled = false
>> | [....]
>> |
>> | *** Handling the second interrupt ***
>> | clear IRQF_RUNTHREAD
>> | call evtchn_interrupt
>> | WARN(...)
>>
>> I am not entirely sure how to fix this. I have two solutions in mind:
>>
>> 1) Prevent the interrupt handler to be threaded. We would also need to
>> switch from spin_lock to raw_spin_lock as the former may sleep on RT-Linux.
>>
>> 2) Remove the warning
>
> I think access to evtchn->enabled is racy so (with or without the warning) we can't use it reliably.

Thinking about it, it would not be the only issue. The ring is sized to contain
only one instance of the same event. So if you receive twice the event, you may
overflow the ring.

>
> Another alternative could be to queue the irq if !evtchn->enabled and handle it in evtchn_write() (which is where irq is supposed to be re-enabled).
What do you mean by queue? Is it queueing in the ring? If so, wouldn't it be
racy as described above?

Cheers,

--
Julien Grall

\
 
 \ /
  Last update: 2019-02-20 15:15    [W:0.097 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site