lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] Stingray USB PHY driver support
Date
These patches add Stingray USB PHY driver and its corresponding
DT nodes with documentation.

This patch set is based on Linux-5.0-rc2.

Changes from v3:
- Addressed Rob Herring review comments
- Changed compatible strings.
- updated driver based on new compatible strings.

Changes from v2:
- Addressed Kishon review comments
- Updated patchset to Linux-5.0-rc2

Changes from v1:
- Addressed Kishon review comments
- phy init call return value handle

Srinath Mannam (3):
dt-bindings: phy: Add Stingray USB PHY binding document
phy: sr-usb: Add Stingray USB PHY driver
arm64: dts: Add USB DT nodes for Stingray SoC

.../bindings/phy/brcm,stingray-usb-phy.txt | 62 ++++
.../boot/dts/broadcom/stingray/stingray-usb.dtsi | 95 ++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
drivers/phy/broadcom/Kconfig | 11 +
drivers/phy/broadcom/Makefile | 1 +
drivers/phy/broadcom/phy-bcm-sr-usb.c | 371 +++++++++++++++++++++
6 files changed, 541 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c

--
2.7.4

\
 
 \ /
  Last update: 2019-02-20 11:35    [W:0.065 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site