lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] drm/panel: Add OSD101T2587-53TS driver
From
Date
Hi Sam,

On 15/02/2019 20.07, Sam Ravnborg wrote:
> Hi Peter.
>
> Good with more panel drivers.
> Some comments in the following, please do not blindly follow them but
> check that this is OK.

First of all, thank you for the review and sorry for the delay!

>
> Sam
>
> On Fri, Feb 15, 2019 at 04:03:15PM +0200, Peter Ujfalusi via dri-devel wrote:
>> The panel is similar to OSD101T2045-53TS (which is handled by panel-simple)
>> with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL
>> message to be sent from the host to be operational and thus can not be
>> handled by panel-simple.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>> +++ b/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c
>> @@ -0,0 +1,284 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
>> + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> + */
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <drm/drmP.h>
> Please do not use drmP.h in new drivers - we try to get rid of this file.

OK.

>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_panel.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +struct osd101t2587_panel {
>> + struct drm_panel base;
>> + struct mipi_dsi_device *dsi;
>> +
>> + struct backlight_device *backlight;
>> + struct regulator *supply;
>> +
>> + bool prepared;
>> + bool enabled;
>> +
>> + ktime_t earliest_wake;
> earliest_wake is not used, and can be deleted.

Yes, it is leftover.

>> +
>> + const struct drm_display_mode *default_mode;
>> + const struct drm_display_mode *mode;
> Assigned but never used. Drop the assignment and the variable?

Hrm, you are right.

>
>> +};
>> +
>> +static inline struct osd101t2587_panel *to_osd101t2587_panel(struct drm_panel *panel)
>> +{
>> + return container_of(panel, struct osd101t2587_panel, base);
>> +}
>> +
>> +static int osd101t2587_panel_disable(struct drm_panel *panel)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
>> + int ret;
>> +
>> + if (!osd101t2587->enabled)
>> + return 0;
>> +
>> + if (osd101t2587->backlight) {
>> + osd101t2587->backlight->props.power = FB_BLANK_POWERDOWN;
>> + osd101t2587->backlight->props.state |= BL_CORE_FBBLANK;
>> + backlight_update_status(osd101t2587->backlight);
>> + }
> backlight_disable(osd101t2587->backlight);

OK

>> +
>> + ret = mipi_dsi_shutdown_peripheral(osd101t2587->dsi);
>> +
>> + osd101t2587->enabled = false;
>> +
>> + return ret;
>> +}
>> +
>> +static int osd101t2587_panel_unprepare(struct drm_panel *panel)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
>> +
>> + if (!osd101t2587->prepared)
>> + return 0;
>> +
>> + regulator_disable(osd101t2587->supply);
>> + osd101t2587->prepared = false;
>> +
>> + return 0;
>> +}
>> +
>> +static int osd101t2587_panel_prepare(struct drm_panel *panel)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
>> + int ret;
>> +
>> + if (osd101t2587->prepared)
>> + return 0;
>> +
>> + ret = regulator_enable(osd101t2587->supply);
>> + if (!ret)
>> + osd101t2587->prepared = true;
>> +
>> + return ret;
>> +}
>> +
>> +static int osd101t2587_panel_enable(struct drm_panel *panel)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
>> + int ret;
>> +
>> + if (osd101t2587->enabled)
>> + return 0;
>> +
>> + ret = mipi_dsi_turn_on_peripheral(osd101t2587->dsi);
>> + if (ret)
>> + return ret;
>> +
>> + if (osd101t2587->backlight) {
>> + osd101t2587->backlight->props.power = FB_BLANK_UNBLANK;
>> + osd101t2587->backlight->props.state &= ~BL_CORE_FBBLANK;
>> + backlight_update_status(osd101t2587->backlight);
>> + }
> backlight_enable(osd101t2587->backlight);
> can be used here.

Yes, it can be used.

>
>> +
>> + osd101t2587->enabled = true;
>> +
>> + return ret;
>> +}
>> +
>> +static const struct drm_display_mode default_mode_osd101t2587 = {
>> + .clock = 164400,
>> + .hdisplay = 1920,
>> + .hsync_start = 1920 + 152,
>> + .hsync_end = 1920 + 152 + 52,
>> + .htotal = 1920 + 152 + 52 + 20,
>> + .vdisplay = 1200,
>> + .vsync_start = 1200 + 24,
>> + .vsync_end = 1200 + 24 + 6,
>> + .vtotal = 1200 + 24 + 6 + 48,
>> + .vrefresh = 60,
>> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>> +};
>> +
>> +static int osd101t2587_panel_get_modes(struct drm_panel *panel)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
>> + struct drm_display_mode *mode;
>> +
>> + mode = drm_mode_duplicate(panel->drm, osd101t2587->default_mode);
>> + if (!mode) {
>> + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
>> + osd101t2587->default_mode->hdisplay,
>> + osd101t2587->default_mode->vdisplay,
>> + osd101t2587->default_mode->vrefresh);
>> + return -ENOMEM;
>> + }
>> +
>> + drm_mode_set_name(mode);
>> +
>> + drm_mode_probed_add(panel->connector, mode);
>> +
>> + panel->connector->display_info.width_mm = 217;
>> + panel->connector->display_info.height_mm = 136;
>> +
>> + return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs osd101t2587_panel_funcs = {
>> + .disable = osd101t2587_panel_disable,
>> + .unprepare = osd101t2587_panel_unprepare,
>> + .prepare = osd101t2587_panel_prepare,
>> + .enable = osd101t2587_panel_enable,
>> + .get_modes = osd101t2587_panel_get_modes,
>> +};
>> +
>> +static const struct of_device_id osd101t2587_of_match[] = {
>> + {
>> + .compatible = "osd,osd101t2587-53ts",
>> + .data = &default_mode_osd101t2587,
>> + }, { }
> Move { } to a separate line and use { /* sentinel */ } to make it look like other drivers.
>
>
>> +};
>> +MODULE_DEVICE_TABLE(of, osd101t2587_of_match);
>> +
>> +static int osd101t2587_panel_add(struct osd101t2587_panel *osd101t2587)
>> +{
>> + struct device *dev = &osd101t2587->dsi->dev;
>> + struct device_node *np;
>> + int ret;
>> +
>> + osd101t2587->mode = osd101t2587->default_mode;
>> +
>> + osd101t2587->supply = devm_regulator_get(dev, "power");
>> + if (IS_ERR(osd101t2587->supply))
>> + return PTR_ERR(osd101t2587->supply);
>> +
>> + np = of_parse_phandle(dev->of_node, "backlight", 0);
>> + if (np) {
>> + osd101t2587->backlight = of_find_backlight_by_node(np);
>> + of_node_put(np);
>> +
>> + if (!osd101t2587->backlight)
>> + return -EPROBE_DEFER;
>> + }
> Use devm_of_find_backlight() - this results in simpler code.

Yes, it certainly makes the code cleaner.

>
>> +
>> + drm_panel_init(&osd101t2587->base);
>> + osd101t2587->base.funcs = &osd101t2587_panel_funcs;
>> + osd101t2587->base.dev = &osd101t2587->dsi->dev;
>> +
>> + ret = drm_panel_add(&osd101t2587->base);
>> + if (ret < 0)
>> + goto put_backlight;
>> +
>> + return 0;
>> +
>> +put_backlight:
>> + if (osd101t2587->backlight)
>> + put_device(&osd101t2587->backlight->dev);
> When using devm_of_find_backlight() this is not needed.

OK.

>
>> +
>> + return ret;
>> +}
>> +
>> +static void osd101t2587_panel_del(struct osd101t2587_panel *osd101t2587)
>> +{
>> + if (osd101t2587->base.dev)
>> + drm_panel_remove(&osd101t2587->base);
>> +
>> + if (osd101t2587->backlight)
>> + put_device(&osd101t2587->backlight->dev);
> When you use devm_of_find_backlight() then this is done for you, so the above can be deleted.

OK.

>> +}
>> +
>> +static int osd101t2587_panel_probe(struct mipi_dsi_device *dsi)
>> +{
>> + struct osd101t2587_panel *osd101t2587;
>> + const struct of_device_id *id;
>> + int ret;
>> +
>> + id = of_match_node(osd101t2587_of_match, dsi->dev.of_node);
>> + if (!id)
>> + return -ENODEV;
>> +
>> + dsi->lanes = 4;
>> + dsi->format = MIPI_DSI_FMT_RGB888;
>> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
>> + MIPI_DSI_MODE_VIDEO_BURST |
>> + MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
>> + MIPI_DSI_MODE_EOT_PACKET;
>> +
>> + osd101t2587 = devm_kzalloc(&dsi->dev, sizeof(*osd101t2587), GFP_KERNEL);
>> + if (!osd101t2587)
>> + return -ENOMEM;
>> +
>> + mipi_dsi_set_drvdata(dsi, osd101t2587);
>> +
>> + osd101t2587->dsi = dsi;
>> + osd101t2587->default_mode = id->data;
>> +
>> + ret = osd101t2587_panel_add(osd101t2587);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return mipi_dsi_attach(dsi);
>> +}
>> +
>> +static int osd101t2587_panel_remove(struct mipi_dsi_device *dsi)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = mipi_dsi_get_drvdata(dsi);
>> + int ret;
>> +
>> + ret = osd101t2587_panel_disable(&osd101t2587->base);
>> + if (ret < 0)
>> + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
>> +
> To trun off power supply call osd101t2587_panel_unprepare() here?
>
>> + ret = mipi_dsi_detach(dsi);
>> + if (ret < 0)
>> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
>> +
>> + osd101t2587_panel_del(osd101t2587);
> Replace this with
> drm_panel_remove(osd101t2587->base);
> This should be fine and no need to disable backlight, this is done in osd101t2587_panel_disable()

OK.

>> +
>> + return 0;
>> +}
>> +
>> +static void osd101t2587_panel_shutdown(struct mipi_dsi_device *dsi)
>> +{
>> + struct osd101t2587_panel *osd101t2587 = mipi_dsi_get_drvdata(dsi);
>> +
> Maybe call osd101t2587_panel_unprepare() here to turn off power supply?

Make sense, in this order:
osd101t2587_panel_disable(&osd101t2587->base);
osd101t2587_panel_unprepare(&osd101t2587->base);

But should the osd101t2587_panel_remove() do the same thing? or the
osd101t2587_panel_disable() is redundant in the osd101t2587_panel_remove()?

Regards,
- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-02-20 11:35    [W:0.069 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site