lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] soc: imx: gpcv2: Make use of regmap_read_poll_timeout()
From
Date
Am Dienstag, den 19.02.2019, 18:14 -0800 schrieb Andrey Smirnov:
> Replace explicit polling loop with a call to
> regmap_read_poll_timeout() to avoid code repetition. Also fix
> misspelled "failed" while at it.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
> drivers/soc/imx/gpcv2.c | 39 ++++++++++++++-------------------------
> 1 file changed, 14 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index 176f473127b6..e06bf12a1e4b 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -136,8 +136,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
> const bool enable_power_control = !on;
> const bool has_regulator = !IS_ERR(domain->regulator);
> - unsigned long deadline;
> int i, ret = 0;
> + u32 pxx_req;
>
> regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
> domain->bits.map, domain->bits.map);
> @@ -169,30 +169,19 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
> * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
> * for PUP_REQ/PDN_REQ bit to be cleared
> */
> - deadline = jiffies + msecs_to_jiffies(1);
> - while (true) {
> - u32 pxx_req;
> -
> - regmap_read(domain->regmap, offset, &pxx_req);
> -
> - if (!(pxx_req & domain->bits.pxx))
> - break;
> -
> - if (time_after(jiffies, deadline)) {
> - dev_err(domain->dev, "falied to command PGC\n");
> - ret = -ETIMEDOUT;
> - /*
> - * If we were in a process of enabling a
> - * domain and failed we might as well disable
> - * the regulator we just enabled. And if it
> - * was the opposite situation and we failed to
> - * power down -- keep the regulator on
> - */
> - on = !on;
> - break;
> - }
> -
> - cpu_relax();
> + ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
> + !(pxx_req & domain->bits.pxx),
> + 0, USEC_PER_MSEC);
> + if (ret) {
> + dev_err(domain->dev, "failed to command PGC\n");
> + /*
> + * If we were in a process of enabling a
> + * domain and failed we might as well disable
> + * the regulator we just enabled. And if it
> + * was the opposite situation and we failed to
> + * power down -- keep the regulator on
> + */
> + on = !on;
> }
>
> if (enable_power_control)

\
 
 \ /
  Last update: 2019-02-20 09:23    [W:0.041 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site