lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V9 3/5] i2c: tegra: Add DMA support
Date
> > This patch adds DMA support for Tegra I2C.
> >
> > Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
> > transfer size of the max FIFO depth and DMA mode is used for transfer
> > size higher than max FIFO depth to save CPU overhead.
> >
> > PIO mode needs full intervention of CPU to fill or empty FIFO's and
> > also need to service multiple data requests interrupt for the same
> > transaction. This adds delay between data bytes of the same transfer
> > when CPU is fully loaded and some slave devices has internal timeout
> > for no bus activity and stops transaction to avoid bus hang. DMA mode
> > is helpful in such cases.
> >
> > DMA mode is also helpful for Large transfers during downloading or
> > uploading FW over I2C to some external devices.
> >
> > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> > ---
>
>
> > +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev) {
> > + struct dma_chan *dma_chan;
> > + u32 *dma_buf;
> > + dma_addr_t dma_phys;
> > + int err = 0;
> > +
> > + if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA))
> > + return -ENODEV;
>
> Another detail is that we need to keep older kernels working on T186+ after its device-tree will get the "dmas" property, device-tree changes shall be backwards-compatible with older kernels. Hence we need to check that platform actually wants the APB DMA driver, otherwise T186+ will be failing with -EPROBE_DEFER.

Yes, that will be a separate patch later for adding DMA support for Tegra186 and later chips once we check on GPCDMA upstream


\
 
 \ /
  Last update: 2019-02-02 19:33    [W:0.184 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site