lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 05/12] net: hns3: add hclge_cmd_check_retval() to parse comman's return value
Date
From: Weihang Li <liweihang@hisilicon.com>

For simplifying the code, this patch adds hclge_cmd_check_retval() to
check the return value of the command.

Also, according the IMP's description, when there are several descriptors
in a command, then the IMP will save the return value on the last
description, so hclge_cmd_check_retval() just check the last one for this
case.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
.../hisilicon/hns3/hns3pf/hclge_cmd.c | 60 ++++++++++---------
1 file changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 81dbe1b6abb0..57c50b947857 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -186,6 +186,38 @@ static bool hclge_is_special_opcode(u16 opcode)
return false;
}

+static int hclge_cmd_check_retval(struct hclge_hw *hw, struct hclge_desc *desc,
+ int num, int ntc)
+{
+ u16 opcode, desc_ret;
+ int handle;
+ int retval;
+
+ opcode = le16_to_cpu(desc[0].opcode);
+ for (handle = 0; handle < num; handle++) {
+ desc[handle] = hw->cmq.csq.desc[ntc];
+ ntc++;
+ if (ntc == hw->cmq.csq.desc_num)
+ ntc = 0;
+ }
+ if (likely(!hclge_is_special_opcode(opcode)))
+ desc_ret = le16_to_cpu(desc[num - 1].retval);
+ else
+ desc_ret = le16_to_cpu(desc[0].retval);
+
+ if (desc_ret == HCLGE_CMD_EXEC_SUCCESS)
+ retval = 0;
+ else if (desc_ret == HCLGE_CMD_NO_AUTH)
+ retval = -EPERM;
+ else if (desc_ret == HCLGE_CMD_NOT_SUPPORTED)
+ retval = -EOPNOTSUPP;
+ else
+ retval = -EIO;
+ hw->cmq.last_status = desc_ret;
+
+ return retval;
+}
+
/**
* hclge_cmd_send - send command to command queue
* @hw: pointer to the hw struct
@@ -203,7 +235,6 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
u32 timeout = 0;
int handle = 0;
int retval = 0;
- u16 opcode, desc_ret;
int ntc;

spin_lock_bh(&hw->cmq.csq.lock);
@@ -219,7 +250,6 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
* which will be use for hardware to write back
*/
ntc = hw->cmq.csq.next_to_use;
- opcode = le16_to_cpu(desc[0].opcode);
while (handle < num) {
desc_to_use = &hw->cmq.csq.desc[hw->cmq.csq.next_to_use];
*desc_to_use = desc[handle];
@@ -250,31 +280,7 @@ int hclge_cmd_send(struct hclge_hw *hw, struct hclge_desc *desc, int num)
if (!complete) {
retval = -EAGAIN;
} else {
- handle = 0;
- while (handle < num) {
- /* Get the result of hardware write back */
- desc_to_use = &hw->cmq.csq.desc[ntc];
- desc[handle] = *desc_to_use;
-
- if (likely(!hclge_is_special_opcode(opcode)))
- desc_ret = le16_to_cpu(desc[handle].retval);
- else
- desc_ret = le16_to_cpu(desc[0].retval);
-
- if (desc_ret == HCLGE_CMD_EXEC_SUCCESS)
- retval = 0;
- else if (desc_ret == HCLGE_CMD_NO_AUTH)
- retval = -EPERM;
- else if (desc_ret == HCLGE_CMD_NOT_SUPPORTED)
- retval = -EOPNOTSUPP;
- else
- retval = -EIO;
- hw->cmq.last_status = desc_ret;
- ntc++;
- handle++;
- if (ntc == hw->cmq.csq.desc_num)
- ntc = 0;
- }
+ retval = hclge_cmd_check_retval(hw, desc, num, ntc);
}

/* Clean the command send queue */
--
2.20.1

\
 
 \ /
  Last update: 2019-02-02 15:42    [W:0.071 / U:2.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site