lkml.org 
[lkml]   [2019]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/8] dt-bindings: phy: Add Amlogic G12A USB3+PCIE Combo PHY Bindings
On Tue, Feb 12, 2019 at 4:15 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the Amlogic G12A Family USB3 + PCIE Combo PHY Bindings.
>
> This PHY can provide exclusively USB3 or PCIE support on shared I/Os.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
one nit-pick below, but apart from that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
> .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> new file mode 100644
> index 000000000000..714d751091f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
> @@ -0,0 +1,25 @@
> +* Amlogic G12A USB3 + PCIE Combo PHY binding
> +
> +Required properties:
> +- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy"
> +- #phys-cells: must be 1. The cell number is used to select the phy mode
> + as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE
> +- reg: The base address and length of the registers
> +- clocks: a phandle to the 100MHz reference clock of this PHY
> +- clock-names: must be "ref_clk"
> +- resets: phandle to the reset lines for:
> + - the PHY control
> + - the USB3+PCIE PHY
> + - the PHY registers
no reset-names (like in the G12A USB2 PHY bindings) here?
even if you don't use them in the driver I suggest you add them for
consistency (and maybe to make it easier to compare the bindings with
the datasheet. I don't have access to the datasheet so I'm not sure if
having the reset-names is relevant for this case)


Regards
Martin

\
 
 \ /
  Last update: 2019-02-17 23:04    [W:0.146 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site