lkml.org 
[lkml]   [2019]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/4] arm64: dts: rockchip: rockpro64 dts remove unused node
From
Date
On 2/16/2019 2:16 AM, Heiko Stübner wrote:
> Am Freitag, 15. Februar 2019, 13:08:16 CET schrieb agajjar:
>> On 2/15/2019 2:48 PM, Heiko Stübner wrote:
>>> Am Mittwoch, 13. Februar 2019, 18:06:38 CET schrieb Akash Gajjar:
>>>> lcd panel pinmux and vcc1v8_s3 regulator is redundant and has a no
>>>> impact,
>>>> so removing it.
>>>>
>>>> Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
>> Hi Heiko,
>>
>>> vcc1v8_s3 is actually also a emmc supply, so I'd like to keep it around
>>> for completenes sake.
>> Emmc module is supplied by PMIC vcc3v3_s3 (SWITCH_REG1) and vcc_1v8
>> (DCD_REG4).
>>
>> So I believe removing vcc1v8_s3 has no impact on emmc supply line.
> looking at the rockpro64 schematics page 10, I see vcca1v8_s3 linked
> to the emmc_vdd_1v8 input and obviously also as reference for the saradc.

You are referring Pilot production release (rockpro64_v20-SCH.pdf),
please refer Second batch production release (rockpro64_v21-SCH.pdf).

both the schematic release is available at
http://wiki.pine64.org/index.php/ROCKPro64_Main_Page

>
> So I think we really could keep it around, so that the power-tree resembles
> the schematics more.

Thanks,

Akash

\
 
 \ /
  Last update: 2019-02-16 16:39    [W:1.961 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site