lkml.org 
[lkml]   [2019]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: rockchip: add chosen node on veyron chromebooks
Date
Am Samstag, 16. Februar 2019, 02:13:25 CET schrieb Alexandru M Stan:
> On Fri, Feb 15, 2019 at 3:09 PM Heiko Stübner <heiko@sntech.de> wrote:
> >
> > Hi Enric,
> >
> > Am Freitag, 15. Februar 2019, 12:51:50 CET schrieb Enric Balletbo i Serra:
> > > In order to use earlycon, the stdout-path property needs to be set
> > > in the chosen node.
> > >
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >
> > What's the reason for adding this only for the Chromebook variants?
> > Uart2 is pretty much the standard output for all devices, so I'd assume
> > at least all veyron boards should use uart2 as well, making this ideally
> > live in the rk3288-veyron.dtsi instead?
>
> Yep, all veyriants use uart 2, even when they're not chromebooks.
> Feel free to put it in the other file instead.
>
> Otherwise it'll make things like the Asus Chromebit (mickey), AOpen
> Chromebox mini (fievel), and AOpen Chromebase (tiger) unhappy
> while debugging.
>
> The rk3288-veyron-chromebook.dtsi file is more for things that make
> a chromebook portable. Ex: built in display, lid switch, cros-ec.
>
> Note how we have no uart2 references either in our tree in the
> chromebook specific dtsi:
> https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi

thanks for the confirmation :-) .

I've moved the choosen node over to veyron.dtsi and applied the result
for 5.1

Thanks
Heiko


\
 
 \ /
  Last update: 2019-02-16 21:29    [W:0.043 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site