lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] iommu/arm-smmu: Allow disabling bypass via kernel config
On Thu, Feb 14, 2019 at 7:40 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Thu, Feb 14, 2019 at 1:32 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >
> > Hi Doug,
> >
> > On 2019-02-14 8:44 pm, Douglas Anderson wrote:
> > > Right now the only way to disable the iommu bypass for the ARM SMMU is
> > > with the kernel command line parameter 'arm-smmu.disable_bypass'.
> > >
> > > In general kernel command line parameters make sense for things that
> > > someone would like to tweak without rebuilding the kernel or for very
> > > basic communication between the bootloader and the kernel, but are
> > > awkward for other things. Specifically:
> > > * Human parsing of the kernel command line can be difficult since it's
> > > just a big runon space separated line of text.
> > > * If every bit of the system was configured via the kernel command
> > > line the kernel command line would get very large and even more
> > > unwieldly.
> > > * Typically there are not easy ways in build systems to adjust the
> > > kernel command line for config-like options.
> > >
> > > Let's introduce a new config option that allows us to disable the
> > > iommu bypass without affecting the existing default nor the existing
> > > ability to adjust the configuration via kernel command line.
> >
> > I say let's just flip the default - for a while now it's been one of
> > those "oh yeah, we should probably do that" things that gets instantly
> > forgotten again, so some 3rd-party demand is plenty to convince me :)
> >
> > There are few reasons to allow unmatched stream bypass, and even fewer
> > good ones, so I'd be happy to shift the command-line burden over to the
> > esoteric cases at this point, and consider the config option in future
> > if anyone from that camp pops up and screams hard enough.
>
> Sure, I can submit that patch if we want. I presume I'll get lots of
> screaming but I'm used to that. ;-)
>
> ...specifically I found that when I turned on "disably bypass" on my
> board (sdm845-cheza, which is not yet upstream) that a bunch of things
> that used to work broke. That's a good thing because all the things
> that broke need to be fixed properly (by adding the IOMMUs) but
> presumably my board is not special in relying on the old insecure
> behavior.

So one niggly bit, beyond the drivers that aren't but should be using
iommu, is the case where bootloader lights up the display. We
actually still have a lot of work to do for this (in that clk and
genpd drivers need to be aware of handover, in addition to just
iommu).. But I'd rather not make a hard problem harder just yet.

(it gets worse, afaict so far on the windows-arm laptops since in that
case uefi/edk is actually taking the iommu out of bypass and things go
badly when arm-smmu disables clks after probe..)

But I might recommend making the default a kconfig option for now, so
in the distro kernel case, where display driver is a kernel module,
you aren't making a hard problem harder. For cases where bootloader
isn't enabling display, things are much easier, and I think we could
switch the default sooner. But I fear for cases where bootloader is
enabling display it is a much harder problem :-(

BR,
-R


>
> I'm about to head on vacation for a week so I'm not sure I'll get to
> re-post before then. If not I'll post this sometime after I get back
> unless someone beats me to it.
>
> -Doug
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu

\
 
 \ /
  Last update: 2019-02-15 23:39    [W:0.071 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site