Messages in this thread | | | Subject | Re: [PATCH 0/4] Add nvmem support on STM32 | From | Fabrice Gasnier <> | Date | Thu, 14 Feb 2019 11:36:11 +0100 |
| |
On 2/13/19 11:34 AM, Srinivas Kandagatla wrote: > > > On 13/02/2019 10:15, Fabrice Gasnier wrote: >> On 1/30/19 5:38 PM, Fabrice Gasnier wrote: >>> Non volatile memory area is available on STM32. It contains various >>> factory programmed information such as unique device ID, analog >>> calibration... >>> This patchset adds NVMEM support to access these data. >> >> Hello, >> >> Gentle reminder for this new driver review > Nvmem provider driver itself looks fine for me, but I am unable to take > this as 5.1 material, as I normally take nvmem patches which are > reviewed and ready before rc5. >
Hi Srini, Thanks for the feedback.
> dt bindings patch needs an ack from DT maintainers.
I hope Rob cant take a look at it.
Best Regards, Fabrice
> > Thanks, > srini >> >> Best Regards, >> Fabrice >> >>> >>> Fabrice Gasnier (4): >>> dt-bindings: nvmem: Add STM32 factory-programmed romem >>> nvmem: Add driver for STM32 factory-programmed read only mem >>> nvmem: stm32: add support for STM32MP15 BSEC to control OTP data >>> ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c >>> >>> .../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++ >>> arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++ >>> drivers/nvmem/Kconfig | 10 + >>> drivers/nvmem/Makefile | 2 + >>> drivers/nvmem/stm32-romem.c | 202 >>> +++++++++++++++++++++ >>> 5 files changed, 258 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt >>> create mode 100644 drivers/nvmem/stm32-romem.c >>>
| |