Messages in this thread | | | Subject | Re: [PATCH v2 1/1] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings | From | Matthias Brugger <> | Date | Thu, 14 Feb 2019 10:04:40 +0100 |
| |
On 14/02/2019 08:54, shun-chih.yu@mediatek.com wrote: > From: Shun-Chih Yu <shun-chih.yu@mediatek.com> > > Document the devicetree bindings for MediaTek Command-Queue DMA controller > which could be found on MT6765 SoC or other similar Mediatek SoCs. > > Signed-off-by: Shun-Chih Yu <shun-chih.yu@mediatek.com> > Reviewed-by: Rob Herring <robh@kernel.org> > Acked-by: Sean Wang <sean.wang@kernel.org> > ---
Please don't send cover letters for single patches, just for series. If you want to add some information to a single patch, which should not show up in the commit message (e.g. change log) you can do that below the "---"
Regards, Matthias
> .../devicetree/bindings/dma/mtk-cqdma.txt | 31 ++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt > > diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt > new file mode 100644 > index 0000000..fb12927 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt > @@ -0,0 +1,31 @@ > +MediaTek Command-Queue DMA Controller > +================================== > + > +Required properties: > + > +- compatible: Must be "mediatek,mt6765-cqdma" for MT6765. > +- reg: Should contain the base address and length for each channel. > +- interrupts: Should contain references to the interrupts for each channel. > +- clocks: Should be the clock specifiers corresponding to the entry in > + clock-names property. > +- clock-names: Should contain "cqdma" entries. > +- dma-channels: The number of DMA channels supported by the controller. > +- dma-requests: The number of DMA request supported by the controller. > +- #dma-cells: The length of the DMA specifier, must be <1>. This one cell > + in dmas property of a client device represents the channel > + number. > +Example: > + > + cqdma: dma-controller@10212000 { > + compatible = "mediatek,mt6765-cqdma"; > + reg = <0 0x10212000 0 0x1000>; > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>, > + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&infracfg CLK_IFR_CQ_DMA>; > + clock-names = "cqdma"; > + dma-channels = <2>; > + dma-requests = <32>; > + #dma-cells = <1>; > + }; > + > +DMA clients must use the format described in dma/dma.txt file. >
| |