lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: pv88060: Fix .ops for PV88060_SW
Date
There is no vsel_reg/vsel_mask settings for PV88060_ID_SWx, so don't use
pv88060_ldo_ops for PV88060_SW. The PV88060_ID_SWx is fixed voltage,
set .fixed_uV instead of .min_uV then regulator core will automatically
support get_voltage and list_voltage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi James,
I don't have this h/w, please help to review and test this patch.
Thanks,
Axel
drivers/regulator/pv88060-regulator.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c
index a9446056435f..d5dab9bef378 100644
--- a/drivers/regulator/pv88060-regulator.c
+++ b/drivers/regulator/pv88060-regulator.c
@@ -184,6 +184,12 @@ static const struct regulator_ops pv88060_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
};

+static const struct regulator_ops pv88060_sw_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \
{\
.desc = {\
@@ -237,9 +243,8 @@ static const struct regulator_ops pv88060_ldo_ops = {
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
- .ops = &pv88060_ldo_ops,\
- .min_uV = max,\
- .uV_step = 0,\
+ .ops = &pv88060_sw_ops,\
+ .fixed_uV = max,\
.n_voltages = 1,\
.enable_reg = PV88060_REG_##regl_name##_CONF,\
.enable_mask = PV88060_SW_EN,\
--
2.17.1
\
 
 \ /
  Last update: 2019-02-15 02:43    [W:0.115 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site