lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/6] nfit/ars: Allow root to busy-poll the ARS state machine
From
Date
The ARS implementation implements exponential back-off on the poll
interval to prevent high-frequency access to the DIMM / platform
interface. Depending on when the ARS completes the poll interval may
exceed the completion event by minutes. Allow root to reset the timeout
each time it probes the status. A one-second timeout is still enforced,
but root can otherwise can control the poll interval.

Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/acpi/nfit/core.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 934be96dc149..5ec0e19760ea 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1328,6 +1328,12 @@ static ssize_t scrub_show(struct device *dev,
rc = sprintf(buf, "%d%s", acpi_desc->scrub_count,
acpi_desc->scrub_busy
&& !acpi_desc->cancel ? "+\n" : "\n");
+ /* Allow an admin to poll the busy state at a higher rate */
+ if (acpi_desc->scrub_busy && !acpi_desc->cancel
+ && capable(CAP_SYS_RAWIO)) {
+ acpi_desc->scrub_tmo = 1;
+ queue_delayed_work(nfit_wq, &acpi_desc->dwork, HZ);
+ }
mutex_unlock(&acpi_desc->init_mutex);
}
device_unlock(dev);
\
 
 \ /
  Last update: 2019-02-14 21:23    [W:0.709 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site