lkml.org 
[lkml]   [2019]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string
On Mon, Feb 04, 2019 at 03:15:52PM -0800, Ray Jui wrote:
> From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
>
> Update iProc I2C binding document to add new compatible string
> "brcm,iproc-nic-i2c". Optional property "brcm,ape-hsls-addr-mask" is
> also added that allows configuration of the host view into the APE's
> address for "brcm,iproc-nic-i2c"
>
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> ---
> Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
> index d3a3620b1f06..02e82d20239e 100644
> --- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
> @@ -3,7 +3,7 @@ Broadcom iProc I2C controller
> Required properties:
>
> - compatible:
> - Must be "brcm,iproc-i2c"
> + Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
>
> - reg:
> Define the base and range of the I/O address space that contain the iProc
> @@ -24,6 +24,9 @@ Optional properties:
> Should contain the I2C interrupt. If unspecified, driver will fall back to
> polling mode
>
> +- brcm,ape-hsls-addr-mask:
> + Required for "brcm,iproc-nic-i2c". Host view of address mask into the
> + 'APE' co-processor

What's the data type and size? What are valid values?

>
> Example:
> i2c0: i2c@18008000 {
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-02-13 22:19    [W:0.128 / U:1.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site