lkml.org 
[lkml]   [2019]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARC: enable uboot support unconditionally
Date
After reworking U-boot args handling code and adding paranoid
arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and
enable uboot support unconditionally.

For JTAG case we can assume that core registers will come up
reset value of 0 or in worst case we rely on user passing
'-on=clear_regs' to Metaware debugger.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
arch/arc/Kconfig | 12 ------------
arch/arc/configs/nps_defconfig | 1 -
arch/arc/configs/vdk_hs38_defconfig | 1 -
arch/arc/configs/vdk_hs38_smp_defconfig | 2 --
arch/arc/kernel/head.S | 2 --
arch/arc/kernel/setup.c | 2 --
6 files changed, 20 deletions(-)

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 376366a7db81..f9534417b201 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -191,7 +191,6 @@ config NR_CPUS

config ARC_SMP_HALT_ON_RESET
bool "Enable Halt-on-reset boot mode"
- default y if ARC_UBOOT_SUPPORT
help
In SMP configuration cores can be configured as Halt-on-reset
or they could all start at same time. For Halt-on-reset, non
@@ -515,17 +514,6 @@ config ARC_DBG_TLB_PARANOIA

endif

-config ARC_UBOOT_SUPPORT
- bool "Support uboot arg Handling"
- help
- ARC Linux by default checks for uboot provided args as pointers to
- external cmdline or DTB. This however breaks in absence of uboot,
- when booting from Metaware debugger directly, as the registers are
- not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
- registers look like uboot args to kernel which then chokes.
- So only enable the uboot arg checking/processing if users are sure
- of uboot being in play.
-
config ARC_BUILTIN_DTB_NAME
string "Built in DTB"
help
diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig
index 6e84060e7c90..621f59407d76 100644
--- a/arch/arc/configs/nps_defconfig
+++ b/arch/arc/configs/nps_defconfig
@@ -31,7 +31,6 @@ CONFIG_ARC_CACHE_LINE_SHIFT=5
# CONFIG_ARC_HAS_LLSC is not set
CONFIG_ARC_KVADDR_SIZE=402
CONFIG_ARC_EMUL_UNALIGNED=y
-CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_PREEMPT=y
CONFIG_NET=y
CONFIG_UNIX=y
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index 1e59a2e9c602..e447ace6fa1c 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -13,7 +13,6 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
-CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
CONFIG_PREEMPT=y
CONFIG_NET=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index b5c3f6c54b03..c82cdb10aaf4 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -15,8 +15,6 @@ CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
# CONFIG_ARC_TIMERS_64BIT is not set
-# CONFIG_ARC_SMP_HALT_ON_RESET is not set
-CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
CONFIG_PREEMPT=y
CONFIG_NET=y
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index fccea361e896..4b0deaff001c 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -90,7 +90,6 @@ ENTRY(stext)
st.ab 0, [r5, 4]
1:

-#ifdef CONFIG_ARC_UBOOT_SUPPORT
; Uboot - kernel ABI
; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
; r1 = magic number (always zero as of now)
@@ -99,7 +98,6 @@ ENTRY(stext)
st r0, [@uboot_tag]
st r1, [@uboot_magic]
st r2, [@uboot_arg]
-#endif

; setup "current" tsk and optionally cache it in dedicated r25
mov r9, @init_task
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 84d394a37e79..fff946b0ab4f 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -490,7 +490,6 @@ void __init handle_uboot_args(void)
bool use_embedded_dtb = true;
bool append_cmdline = false;

-#ifdef CONFIG_ARC_UBOOT_SUPPORT
/* check that we know this tag */
if (uboot_tag != UBOOT_TAG_NONE &&
uboot_tag != UBOOT_TAG_CMDLINE &&
@@ -521,7 +520,6 @@ void __init handle_uboot_args(void)
append_cmdline = true;

ignore_uboot_args:
-#endif

if (use_embedded_dtb) {
machine_desc = setup_machine_fdt(__dtb_start);
--
2.14.5
\
 
 \ /
  Last update: 2019-02-12 16:41    [W:0.369 / U:1.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site