lkml.org 
[lkml]   [2019]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 0/4] Introduce TEE bus driver framework
On Tue, 12 Feb 2019 at 16:35, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>
> On Tue, 29 Jan 2019 at 06:50, Sumit Garg <sumit.garg@linaro.org> wrote:
> >
> > This series introduces a generic TEE bus driver concept for TEE based
> > kernel drivers which would like to communicate with TEE based devices/
> > services.
> >
> > Patch #1 adds TEE bus concept where devices/services are identified via
> > Universally Unique Identifier (UUID) and drivers register a table of
> > device UUIDs which they can support. This concept also allows for device
> > enumeration to be specific to corresponding TEE implementation like
> > OP-TEE etc.
> >
> > Patch #2 adds supp_nowait flag for non-blocking requests arising via
> > TEE internal client interface.
> >
> > Patch #3 adds TEE bus device enumeration support for OP-TEE. OP-TEE
> > provides a pseudo TA to enumerate TAs which can act as devices/services
> > for TEE bus.
> >
> > Patch #4 adds OP-TEE based hwrng driver which act as TEE bus driver.
> > On ARM SoC's with TrustZone enabled, peripherals like entropy sources
> > might not be accessible to normal world (linux in this case) and rather
> > accessible to secure world (OP-TEE in this case) only. So this driver
> > aims to provides a generic interface to OP-TEE based random number
> > generator service.
> >
> > Example case is Developerbox based on Socionext's Synquacer SoC [1]
> > which provides 7 thermal sensors accessible from secure world only which
> > could be used as entropy sources (thermal/measurement noise).
> >
> > [1] https://www.96boards.org/product/developerbox/
> >
> > Changes in v6:
> >
> > 1. Incorporate some nitpicks in patch #1 and #3.
> > 2. Bundle all statics in a data structure in patch #4 and use dev_*
> > instead of pr_*.
> > 3. Add reviewed-by tags for patch #1, #2 and #3.
> >
> > Changes in v5:
> >
> > 1. Add support in module device table for TEE bus devices.
> > 2. Correct license for optee-rng module.
> >
> > Changes in v4:
> >
> > 1. Use typedef instead of single member tee_client_device_id struct.
> > 2. Incorporate TEE bus nitpicks.
> >
> > Changes in v3:
> >
> > 1. Fixed bus error path in Patch #1.
> > 2. Reversed order of Patch #2 and #3.
> > 3. Fixed miscellaneous syntax comments and memory leak.
> > 4. Added comments in Patch #2 for supp_nowait flag.
> >
> > Changes in v2:
> >
> > Based on review comments, the scope of this series has increased as
> > follows:
> >
> > 1. Added TEE bus driver framework.
> > 2. Added OP-TEE based device enumeration.
> > 3. Register optee-rng driver as TEE bus driver.
> > 4. Removed DT dependency for optee-rng device UUID.
> > 5. Added supp_nowait flag.
> >
> > Sumit Garg (4):
> > tee: add bus driver framework for TEE based devices
> > tee: add supp_nowait flag in tee_context struct
> > tee: optee: add TEE bus device enumeration support
> > hwrng: add OP-TEE based rng driver
> >
>
> For this series
>
> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>

Thanks. BTW, Jens has created a GIT PULL[1] to incorporate this patch-set.

> although I had to load optee.ko manually in order for the udev
> autoload of optee_rng to trigger.

Did you built OP-TEE module as out-of-tree? OP-TEE by-default is
built-in kernel module as per following configs in default defconfig:

CONFIG_TEE=y
CONFIG_OPTEE=y

> Not sure where the discussion went
> last time, but could we please add "linaro,optee-tz" as a DT modalias
> to the optee.ko module in any case?
>

This change is already part of your RFC patch [2] and I agree to make
OP-TEE as platform driver.

[1] https://lkml.org/lkml/2019/2/4/104
[2] https://lkml.org/lkml/2018/12/27/196

-Sumit

> > MAINTAINERS | 5 +
> > drivers/char/hw_random/Kconfig | 15 ++
> > drivers/char/hw_random/Makefile | 1 +
> > drivers/char/hw_random/optee-rng.c | 298 +++++++++++++++++++++++++++++++++++++
> > drivers/tee/optee/Makefile | 1 +
> > drivers/tee/optee/core.c | 4 +
> > drivers/tee/optee/device.c | 155 +++++++++++++++++++
> > drivers/tee/optee/optee_private.h | 3 +
> > drivers/tee/optee/supp.c | 10 +-
> > drivers/tee/tee_core.c | 67 ++++++++-
> > include/linux/mod_devicetable.h | 9 ++
> > include/linux/tee_drv.h | 38 ++++-
> > scripts/mod/devicetable-offsets.c | 3 +
> > scripts/mod/file2alias.c | 19 +++
> > 14 files changed, 622 insertions(+), 6 deletions(-)
> > create mode 100644 drivers/char/hw_random/optee-rng.c
> > create mode 100644 drivers/tee/optee/device.c
> >
> > --
> > 2.7.4
> >

\
 
 \ /
  Last update: 2019-02-12 13:09    [W:0.115 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site