Messages in this thread Patch in this message | | | From | Nava kishore Manne <> | Subject | [PATCH v3 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver | Date | Mon, 11 Feb 2019 21:47:36 +0530 |
| |
Add documentation to describe Xilinx ZynqMP fpga driver bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> --- Changes for v3: -Created patches on top of 5.0-rc5. No functional changes. Changes for v2: -Removed "----" separators. Changes for v1: -Created a Seperate(New) DT binding file as suggested by Rob.
Changes for RFC-V2: -Moved pcap node as a child to firwmare node as suggested by Rob.
.../devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt new file mode 100644 index 0000000..1f6f588 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt @@ -0,0 +1,13 @@ +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled +using ZynqMP SoC firmware interface +For Bitstream configuration on ZynqMp Soc uses processor configuration +port(PCAP) to configure the programmable logic(PL) through PS by using +FW interface. + +Required properties: +- compatible: should contain "xlnx,zynqmp-pcap-fpga" + +Example: + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; -- 2.7.4
| |