lkml.org 
[lkml]   [2019]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: imx7: add DMA properties for ECSPI
On Thu, Feb 07, 2019 at 09:00:44PM +0000, Trent Piepho wrote:
> On Mon, 2019-01-07 at 14:22 +0100, Stefan Agner wrote:
> > Allow to use DMA for SPI by adding the appropriate DMA properites
> > to the ecspi nodes.
> >
> > Signed-off-by: Stefan Agner <stefan@agner.ch>
> > ---
> > arch/arm/boot/dts/imx7s.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> > index a052198f6e96..b9330176c3af 100644
> > --- a/arch/arm/boot/dts/imx7s.dtsi
> > +++ b/arch/arm/boot/dts/imx7s.dtsi
> > @@ -653,6 +653,8 @@
> > clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
> > <&clks IMX7D_ECSPI4_ROOT_CLK>;
> > clock-names = "ipg", "per";
> > + dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
> > + dma-names = "rx", "tx";
> > status = "disabled";
> > };
>
> After updating my kernel to linux-next on my IMX7d based device, I
> found that an FPGA, which is programmed via the ECSPI interface, was no
> longer accepting its image.
>
> I tracked the problem to this change. If I turn off DMA, it works.
>
> There's an interesting thing that happens when DMA is used. The SPI
> clock changes. Instead of cycling continuously for the entire
> transfer, it instead clocks out 8 bits, then pauses for 4 bit times,
> then the next byte, etc. So it's a net of about 50% slower. The pause
> between bytes scales with spi frequency to always be about 4 bits.
>
> Here's a trace with DMA: https://imagebin.ca/v/4WEkEnvsVSkq
>
> Here's what it looks like without DMA:
> https://imagebin.ca/v/4WEkVfEqpQ12
>
> It seems like there are other problems with DMA too. Here's an error
> I'll random get every so often.
>
> [ 142.082325] spi_master spi1: I/O Error in DMA RX
> [ 142.085678] spidev spi1.0: SPI transfer failed: -110
> [ 142.089389] spi_master spi1: failed to transfer one message from queue
>
> Not sure if the timeout is overly aggressive or if there is some other failure.
>
> Then sometimes there errors are worse:
>
> Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM
> Modules linked in:
> CPU: 0 PID: 1006 Comm: fpga-loader Not tainted 5.0.0-rc4-next-20190201 #1
> Hardware name: Freescale i.MX7 Dual (Device Tree)
> PC is at sg_last+0x4c/0x68
> LR is at (null)
> pc : [<80494800>] lr : [<00000000>] psr: 60010013
> sp : bf0add5c ip : bea94598 fp : bf371218
> r10: bf0949f0 r9 : 00000000 r8 : bf094800
> r7 : bdc39300 r6 : bf371000 r5 : bdc39300 r4 : bf094b68
> r3 : 00000000 r2 : 00000001 r1 : 00000001 r0 : bea94580
> Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
> Control: 30c5387d Table: bea94000 DAC: fffffffd
> Process fpga-loader (pid: 1006, stack limit = 0x61bc8b73)
> Stack: (0xbf0add5c to 0xbf0ae000)
> dd40: 8056cdb0
> dd60: 8056c9ac 00001000 00000000 bdc39300 bf094800 bf094b68 bf371000 00000000
> dd80: bf0949f0 8056bc00 bf094800 bdc39300 bf0adeac bf094800 bf094ad0 80569edc
> ...
> dfc0: 00217301 00150000 00001000 00000036 00df2010 00000003 00001000 00df1008
> dfe0: 00022f70 7e9ebb14 000113b8 76f2a7f8 20010030 00000003 00000000 00000000
> [<80494800>] (sg_last) from [<8056cdb0>] (spi_imx_transfer+0xd8/0x448)
> [<8056cdb0>] (spi_imx_transfer) from [<8056bc00>] (spi_bitbang_transfer_one+0x50/0xa0)
> [<8056bc00>] (spi_bitbang_transfer_one) from [<80569edc>] (spi_transfer_one_message+0x18c/0x3e0)
> [<80569edc>] (spi_transfer_one_message) from [<8056a498>] (__spi_pump_messages+0x368/0x518)
> [<8056a498>] (__spi_pump_messages) from [<8056a7ec>] (__spi_sync+0x198/0x1a0)
> [<8056a7ec>] (__spi_sync) from [<8056a818>] (spi_sync+0x24/0x3c)
> [<8056a818>] (spi_sync) from [<8056ae14>] (spidev_sync+0x38/0x4c)
> [<8056ae14>] (spidev_sync) from [<8056b6f4>] (spidev_ioctl+0x660/0x704)
> [<8056b6f4>] (spidev_ioctl) from [<80335f9c>] (do_vfs_ioctl+0xac/0x79c)
> [<80335f9c>] (do_vfs_ioctl) from [<803366c0>] (ksys_ioctl+0x34/0x58)
> [<803366c0>] (ksys_ioctl) from [<80201120>] (ret_fast_syscall+0x0/0x4c)
> Exception stack(0xbf0adfa8 to 0xbf0adff0)
> dfa0: 00217301 00150000 00000003 40206b00 7e9ebb80 03938700
> dfc0: 00217301 00150000 00001000 00000036 00df2010 00000003 00001000 00df1008
> dfe0: 00022f70 7e9ebb14 000113b8 76f2a7f8
> Code: e1510002 1afffff3 e3530000 149df004 (e7f001f2)
> ---[ end trace 1588229fc7541669 ]---
>
> I think DMA on imx not be ready for prime time yet.

I dropped both patches from my tree.

Shawn

\
 
 \ /
  Last update: 2019-02-11 02:24    [W:0.794 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site