lkml.org 
[lkml]   [2019]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/5] ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1
From
Date
Hi Amélie,

On 11/21/19 5:12 PM, Amelie Delaunay wrote:
> phy-names is required by usbotg_hs driver to get the phy, otherwise, it
> considers that there is no phys property.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index 2010f6292a77..228e35e16884 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -355,6 +355,7 @@
> &usbotg_hs {
> dr_mode = "peripheral";
> phys = <&usbphyc_port1 0>;
> + phy-names = "usb2-phy";
> status = "okay";
> };
>
>


Series applied on stm32-next.

Note: due to new STM32 diversity I renamed some patches.

Regards
Alex

\
 
 \ /
  Last update: 2019-12-09 15:45    [W:0.030 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site