lkml.org 
[lkml]   [2019]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH v8 00/19] Consolidate and improve NVIDIA Tegra CPUIDLE driver(s)
    On Tue, Dec 03, 2019 at 03:40:57AM +0300, Dmitry Osipenko wrote:
    > Hello,
    >
    > This series does the following:
    >
    > 1. Unifies Tegra20/30/114 drivers into a single driver and moves it out
    > into common drivers/cpuidle/ directory.
    >
    > 2. Enables CPU cluster power-down idling state on Tegra30.
    >
    > In the end there is a quite nice clean up of the Tegra CPUIDLE drivers
    > and of the Tegra's arch code in general. Please review, thanks!
    >
    > Changelog:
    >
    > v8: - Rebased on recent linux-next, now making use of
    > cpuidle_driver_state_disabled(). [...]

    Dear Dmitry

    This rebase was not complete, at least in patch 14 direct access to
    .disabled field (now removed in Linus' master) are left. The fixups
    needed are below (only compile-tested for now).

    Best Regards,
    Michał Mirosław

    diff --git a/drivers/cpuidle/cpuidle-tegra.c b/drivers/cpuidle/cpuidle-tegra.c
    index 077ff15e32fb..2d325d3aab57 100644
    --- a/drivers/cpuidle/cpuidle-tegra.c
    +++ b/drivers/cpuidle/cpuidle-tegra.c
    @@ -306,13 +306,12 @@ static struct cpuidle_driver tegra_idle_driver = {
    */
    void tegra_cpuidle_pcie_irqs_in_use(void)
    {
    - if (tegra_idle_driver.states[TEGRA_CC6].disabled ||
    + if ((tegra_idle_driver.states[TEGRA_CC6].flags & CPUIDLE_FLAG_UNUSABLE) &&
    tegra_get_chip_id() != TEGRA20)
    return;

    pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
    cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_CC6, true);
    - tegra_idle_driver.states[TEGRA_CC6].disabled = true;
    }

    static void tegra_cpuidle_setup_tegra114_c7_state(void)
    @@ -328,7 +327,7 @@ static int tegra_cpuidle_probe(struct platform_device *pdev)
    {
    /* LP2 could be disabled in device-tree */
    if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
    - tegra_idle_driver.states[TEGRA_CC6].disabled = true;
    + cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_CC6, true);

    /*
    * Required suspend-resume functionality, which is provided by the
    @@ -337,9 +336,9 @@ static int tegra_cpuidle_probe(struct platform_device *pdev)
    */
    if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
    if (!tegra_cpuidle_using_firmware())
    - tegra_idle_driver.states[TEGRA_C7].disabled = true;
    + cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_C7, true);

    - tegra_idle_driver.states[TEGRA_CC6].disabled = true;
    + cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_CC6, true);
    }

    /*
    @@ -349,7 +348,7 @@ static int tegra_cpuidle_probe(struct platform_device *pdev)
    switch (tegra_get_chip_id()) {
    case TEGRA20:
    /* Tegra20 isn't capable to power-off individual CPU cores */
    - tegra_idle_driver.states[TEGRA_C7].disabled = true;
    + cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_C7, true);
    break;
    case TEGRA30:
    break;
    @@ -358,7 +357,7 @@ static int tegra_cpuidle_probe(struct platform_device *pdev)
    tegra_cpuidle_setup_tegra114_c7_state();

    /* coupled CC6 (LP2) state isn't implemented yet */
    - tegra_idle_driver.states[TEGRA_CC6].disabled = true;
    + cpuidle_driver_state_disabled(&tegra_idle_driver, TEGRA_CC6, true);
    break;
    default:
    return -EINVAL;
    \
     
     \ /
      Last update: 2019-12-07 20:32    [W:4.345 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site