Messages in this thread | | | Subject | Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio | From | Sean Nyekjaer <> | Date | Fri, 6 Dec 2019 14:49:52 +0100 |
| |
On 05/12/2019 08.36, Sean Nyekjaer wrote: > > > On 04/12/2019 18.51, Dan Murphy wrote: >> The wake-up of the device can be configured as an optional >> feature of the device. Move the wake-up gpio from a requried >> property to an optional property. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> CC: Rob Herring <robh@kernel.org> > Reviewed-by: Sean Nyekjaer <sean@geanix.com> Tested-by: Sean Nyekjaer <sean@geanix.com> >> --- >> Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt >> b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt >> index 27e1b4cebfbd..7cf5ef7acba4 100644 >> --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt >> +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt >> @@ -10,7 +10,6 @@ Required properties: >> - #size-cells: 0 >> - spi-max-frequency: Maximum frequency of the SPI bus the chip can >> operate at should be less than or equal to 18 MHz. >> - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. >> - interrupt-parent: the phandle to the interrupt controller >> which provides >> the interrupt. >> - interrupts: interrupt specification for data-ready. >> @@ -23,6 +22,7 @@ Optional properties: >> reset. >> - device-state-gpios: Input GPIO that indicates if the device is in >> a sleep state or if the device is active. >> + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. >> Example: >> tcan4x5x: tcan4x5x@0 { >>
| |