lkml.org 
[lkml]   [2019]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 06/12] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA
From
Date
Hi Vinod,

On 20/12/2019 12.42, Peter Ujfalusi wrote:
> Hi Vinod,
>
> On 20/12/2019 11.54, Vinod Koul wrote:
>> On 09-12-19, 11:43, Peter Ujfalusi wrote:
>>
>>> +#define CPPI5_INFO2_DESC_RETPUSHPOLICY BIT(16)
>>> +#define CPPI5_INFO2_DESC_RETP_MASK GENMASK(18, 16)
>>> +
>>> +#define CPPI5_INFO2_DESC_RETQ_SHIFT (0)
>>> +#define CPPI5_INFO2_DESC_RETQ_MASK GENMASK(15, 0)
>>> +
>>> +#define CPPI5_INFO3_DESC_SRCTAG_SHIFT (16U)
>>> +#define CPPI5_INFO3_DESC_SRCTAG_MASK GENMASK(31, 16)
>>> +#define CPPI5_INFO3_DESC_DSTTAG_SHIFT (0)
>>> +#define CPPI5_INFO3_DESC_DSTTAG_MASK GENMASK(15, 0)
>>> +
>>> +#define CPPI5_BUFINFO1_HDESC_DATA_LEN_SHIFT (0)
>>> +#define CPPI5_BUFINFO1_HDESC_DATA_LEN_MASK GENMASK(27, 0)
>>> +
>>> +#define CPPI5_OBUFINFO0_HDESC_BUF_LEN_SHIFT (0)
>>> +#define CPPI5_OBUFINFO0_HDESC_BUF_LEN_MASK GENMASK(27, 0)
>>
>> I think you can remove the SHIFT defines and use ffs() to get the bit
>> position for shift
>
> Right. I'll convert to use ffs()

I rather keep the defines.
While ffs() is simple, it is going to have effect in speeds gigabit or
beyond.

>>> +static inline u32 cppi5_hdesc_calc_size(bool epib, u32 psdata_size,
>>> + u32 sw_data_size)
>>> +{
>>> + u32 desc_size;
>>> +
>>> + if (psdata_size > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE)
>>> + return 0;
>>> +
>>> + desc_size = sizeof(struct cppi5_host_desc_t) + psdata_size +
>>> + sw_data_size;
>>
>> I think there was an API for this kind of mem allocation of struct and
>> buffer attached...
>
> The returned size is not only used when allocating memory or setting up
> the dma_pool, but for UDMAP's fetch size parameter.
>
>>> +static inline void cppi5_hdesc_reset_hbdesc(struct cppi5_host_desc_t *desc)
>>> +{
>>> + desc->hdr = (struct cppi5_desc_hdr_t) { 0 };
>>> + desc->next_desc = 0;
>>
>> would this not be superfluous? Or if you want a memset call?
>
> The intention is to reset the header and the next descriptor link but
> leave the backing buffer information intact. This allows the reuse of a
> descriptor+buffer and we only need to set the header bits + next
> descriptor pointer if any.
>
>>> +static inline u32 *cppi5_hdesc_get_psdata32(struct cppi5_host_desc_t *desc)
>>> +{
>>> + return (u32 *)cppi5_hdesc_get_psdata(desc);
>>
>> you dont need casts away from void *
>
> Hrm, or just remove this, clients can use the cppi5_hdesc_get_psdata()
> directly.
>
>
> - Péter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-23 08:12    [W:0.338 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site