lkml.org 
[lkml]   [2019]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
From
Date
Hi Pavel,

[- Roc He, - chipset vendors]

Am 21.12.19 um 19:20 schrieb Pavel Machek:
>> It goes on to add a "text" attribute to the driver that enables DT-configured
>> seven-segment displays; I was expecting to find precedence in auxdisplay
>> subsystem but came up empty. So my driver currently integrates its own
>> generic (but incomplete) character-to-8-segments mapping, as well as in a
>> second step a combined-characters-to-8-segments mapping, which then gets
>> mapped to the chipset's available output lines. Doing this as sysfs
>> device
>
> I did not investigate this in great detail; but if it is displaying
> characters, auxdisplay is probably right subsystem to handle that.

ausdisplay does not have any common API AFAICS. Most of them are
high-level displays with some parallel interface to set text and
metadata. Half of them hardcode the text to Linux or maybe offer a
Kconfig option to override it; the other half implements their own
character device file with ABI specific to that driver.

> I
> guess LEDs can still take the low-level parts...

I'd hope so, but I believe we're missing multiple things there:

1) A bulk-update API for setting multiple LEDs at once.
.brightness_set[_blocking]() is all we have on the device side, which
here results in two SPI commands. led_set_brightness[_sync]() is all I
see on the API side. We'd need an API that takes an array of LEDs and
brightness values and allows a common driver rather than individual
devices to update the Display RAM via SPI from an internal buffer.

2) DT is currently limited to one node per LED device. We'd need
#led-cells, with current LED nodes defaulting to zero. That way we could
address LEDs from an external, e.g., auxdisplay driver via a two-cell
index for these LED controllers, without needing to have DT nodes for
each and every display segment.

3) Better LED device names. More "function" values, or a reversal of the
label deprecation. Or an alternative API to register LEDs with manual name.

4) LED triggers controlling more than one LED. linux,default-trigger
seems to assign one per LED, so that two heartbeats are quickly out of
sync. Doing it from code would probably be simpler than finding a way to
model this in DT, but I don't yet see how.

Alternatively we could expose those LED output lines as a gpiochip,
which we can already index in DT, and consider the display GPIO-based,
but then we're in the situation again that GregKH was telling people to
either go screw themselves in userspace or move things into leds, which
now you're against.

Also, if you don't allow displays in leds, then we can't have LED
triggers for them either.

>
> Oh, and common dimming for many LEDs is seen on other hardware, too
> (Turris routers). Not sure how to handle that, either :-(.

That part I have indeed successfully solved with a backlight device.

My current problem (WIP blocking a push) is the key input handling - not
sure how to model both LEDs and keys as DT child nodes - do we need a
compatible to distinguish between them? Unit addresses and reg values
would be in different ranges, making this awkward, not to mention the
problem of naming a compatible, given the incredible diverse chipsets.

Regards,
Andreas

--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

\
 
 \ /
  Last update: 2019-12-21 22:07    [W:0.282 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site