lkml.org 
[lkml]   [2019]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy
Date
This is the PHY chip for USB HSIC on MMP3 platform.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../bindings/phy/marvell,mmp3-hsic-phy.yaml | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 0000000000000..7917a95cda78d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ const: marvell,mmp3-hsic-phy
+
+ reg:
+ maxItems: 1
+ description: base address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to reset
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - "#phy-cells"
+
+examples:
+ - |
+ hsic-phy@f0001800 {
+ compatible = "marvell,mmp3-hsic-phy";
+ reg = <0xf0001800 0x40>;
+ reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
--
2.24.1
\
 
 \ /
  Last update: 2019-12-20 07:54    [W:0.142 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site