lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] clk: fsl-sai: new driver
Hi,

Am 2019-11-23 00:56, schrieb Michael Walle:
> With this driver it is possible to use the BCLK pin of the SAI module
> as
> a generic clock output. This is esp. useful if you want to drive a
> clock
> to an audio codec. Because the output only allows integer divider
> values
> the audio codec needs an integrated PLL.

ping :)

will someone pull this driver? Or have any remarks?

Here is the board what would use this driver:
https://lore.kernel.org/linux-devicetree/20191123201317.25861-5-michael@walle.cc/

-michael


>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> drivers/clk/Kconfig | 12 ++++++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-fsl-sai.c | 84 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 97 insertions(+)
> create mode 100644 drivers/clk/clk-fsl-sai.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index c44247d0b83e..d3bd43e8a912 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -167,6 +167,18 @@ config COMMON_CLK_CS2000_CP
> help
> If you say yes here you get support for the CS2000 clock
> multiplier.
>
> +config COMMON_CLK_FSL_SAI
> + bool "Clock driver for BCLK of Freescale SAI cores"
> + depends on ARCH_LAYERSCAPE || COMPILE_TEST
> + help
> + This driver supports the Freescale SAI (Synchronous Audio
> Interface)
> + to be used as a generic clock output. Some SoCs have restrictions
> + regarding the possible pin multiplexer settings. Eg. on some SoCs
> + two SAI interfaces can only be enabled together. If just one is
> + needed, the BCLK pin of the second one can be used as general
> + purpose clock output. Ideally, it can be used to drive an audio
> + codec (sometimes known as MCLK).
> +
> config COMMON_CLK_GEMINI
> bool "Clock driver for Cortina Systems Gemini SoC"
> depends on ARCH_GEMINI || COMPILE_TEST
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 0138fb14e6f8..139f55e544a8 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
> obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
> obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
> obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
> +obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
> obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
> obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
> obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
> diff --git a/drivers/clk/clk-fsl-sai.c b/drivers/clk/clk-fsl-sai.c
> new file mode 100644
> index 000000000000..b92054d15ab1
> --- /dev/null
> +++ b/drivers/clk/clk-fsl-sai.c
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Freescale SAI BCLK as a generic clock driver
> + *
> + * Copyright 2019 Kontron Europe GmbH
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +
> +#define I2S_CSR 0x00
> +#define I2S_CR2 0x08
> +#define CSR_BCE_BIT 28
> +#define CR2_BCD BIT(24)
> +#define CR2_DIV_SHIFT 0
> +#define CR2_DIV_WIDTH 8
> +
> +struct fsl_sai_clk {
> + struct clk_divider div;
> + struct clk_gate gate;
> + spinlock_t lock;
> +};
> +
> +static void __init fsl_sai_clk_setup(struct device_node *node)
> +{
> + const char *clk_name = node->name;
> + struct fsl_sai_clk *sai_clk;
> + unsigned int num_parents;
> + const char *parent_name;
> + void __iomem *base;
> + struct clk_hw *hw;
> +
> + num_parents = of_clk_get_parent_count(node);
> + if (!num_parents) {
> + pr_err("%s: no parent found", clk_name);
> + return;
> + }
> +
> + parent_name = of_clk_get_parent_name(node, 0);
> +
> + sai_clk = kzalloc(sizeof(*sai_clk), GFP_KERNEL);
> + if (!sai_clk)
> + return;
> +
> + base = of_iomap(node, 0);
> + if (base == NULL) {
> + pr_err("%s: failed to map register space", clk_name);
> + goto err;
> + }
> +
> + spin_lock_init(&sai_clk->lock);
> +
> + sai_clk->gate.reg = base + I2S_CSR;
> + sai_clk->gate.bit_idx = CSR_BCE_BIT;
> + sai_clk->gate.lock = &sai_clk->lock;
> +
> + sai_clk->div.reg = base + I2S_CR2;
> + sai_clk->div.shift = CR2_DIV_SHIFT;
> + sai_clk->div.width = CR2_DIV_WIDTH;
> + sai_clk->div.lock = &sai_clk->lock;
> +
> + /* set clock direction, we are the BCLK master */
> + writel(CR2_BCD, base + I2S_CR2);
> +
> + hw = clk_hw_register_composite(NULL, clk_name, &parent_name, 1,
> + NULL, NULL,
> + &sai_clk->div.hw, &clk_divider_ops,
> + &sai_clk->gate.hw, &clk_gate_ops,
> + CLK_SET_RATE_GATE);
> + if (IS_ERR(hw))
> + goto err;
> +
> + of_clk_add_hw_provider(node, of_clk_hw_simple_get, hw);
> +
> + return;
> +
> +err:
> + kfree(sai_clk);
> +}
> +
> +CLK_OF_DECLARE(fsl_sai_clk, "fsl,vf610-sai-clock", fsl_sai_clk_setup);

\
 
 \ /
  Last update: 2019-12-02 22:47    [W:0.069 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site