lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] I2C: JZ4780: Add support for the X1000.
Hi Zhou,


Le lun., déc. 16, 2019 at 18:06, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> Add support for probing i2c driver on the X1000 Soc from Ingenic.
> call the corresponding fifo parameter according to the device
> model obtained from the devicetree.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
>
> Notes:
> v1->v2:
> Add code to check device_get_match_data(), if it return a NULL
> ptr,
> then print an error message and return -ENODEV.
>
> drivers/i2c/busses/i2c-jz4780.c | 155
> +++++++++++++++++++++++++++++-----------
> 1 file changed, 115 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-jz4780.c
> b/drivers/i2c/busses/i2c-jz4780.c
> index 25dcd73..f07a07c 100644
> --- a/drivers/i2c/busses/i2c-jz4780.c
> +++ b/drivers/i2c/busses/i2c-jz4780.c
> @@ -4,6 +4,7 @@
> *
> * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
> * Copyright (C) 2015 Imagination Technologies
> + * Copyright (C) 2019 周琰杰 (Zhou Yanjie)
> <zhouyanjie@wanyeetech.com>
> */
>
> #include <linux/bitops.h>
> @@ -17,6 +18,7 @@
> #include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/sched.h>
> #include <linux/slab.h>
> @@ -55,6 +57,7 @@
> #define JZ4780_I2C_ACKGC 0x98
> #define JZ4780_I2C_ENSTA 0x9C
> #define JZ4780_I2C_SDAHD 0xD0
> +#define X1000_I2C_SDAHD 0x7C
>
> #define JZ4780_I2C_CTRL_STPHLD BIT(7)
> #define JZ4780_I2C_CTRL_SLVDIS BIT(6)
> @@ -73,6 +76,8 @@
> #define JZ4780_I2C_STA_TFNF BIT(1)
> #define JZ4780_I2C_STA_ACT BIT(0)
>
> +#define X1000_I2C_DC_STOP BIT(9)
> +
> static const char * const jz4780_i2c_abrt_src[] = {
> "ABRT_7B_ADDR_NOACK",
> "ABRT_10ADDR1_NOACK",
> @@ -130,18 +135,33 @@ static const char * const jz4780_i2c_abrt_src[]
> = {
> #define JZ4780_I2CFLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1))
>
> #define JZ4780_I2C_FIFO_LEN 16
> -#define TX_LEVEL 3
> -#define RX_LEVEL (JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
> +
> +#define X1000_I2C_FIFO_LEN 64
>
> #define JZ4780_I2C_TIMEOUT 300
>
> #define BUFSIZE 200
>
> +enum ingenic_i2c_version {
> + ID_JZ4780,
> + ID_X1000,
> +};
> +
> +/* ingenic_i2c_config: SoC specific config data. */
> +struct ingenic_i2c_config {
> + enum ingenic_i2c_version version;
> +
> + int fifosize;
> + int tx_level;
> + int rx_level;
> +};
> +
> struct jz4780_i2c {
> void __iomem *iomem;
> int irq;
> struct clk *clk;
> struct i2c_adapter adap;
> + const struct ingenic_i2c_config *cdata;
>
> /* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler
> */
> spinlock_t lock;
> @@ -340,11 +360,18 @@ static int jz4780_i2c_set_speed(struct
> jz4780_i2c *i2c)
>
> if (hold_time >= 0) {
> /*i2c hold time enable */
> - hold_time |= JZ4780_I2C_SDAHD_HDENB;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
> + if (i2c->cdata->version >= ID_X1000)
> + jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, hold_time);
> + else {

If only one branch of a conditional statement is a single statement,
then you should use braces in both branches.

See:
https://www.kernel.org/doc/html/v4.10/process/coding-style.html#placing-braces-and-spaces


> + hold_time |= JZ4780_I2C_SDAHD_HDENB;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
> + }
> } else {
> /* disable hold time */
> - jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
> + if (i2c->cdata->version >= ID_X1000)
> + jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, 0);
> + else
> + jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
> }
>
> return 0;
> @@ -359,9 +386,11 @@ static int jz4780_i2c_cleanup(struct jz4780_i2c
> *i2c)
> spin_lock_irqsave(&i2c->lock, flags);
>
> /* can send stop now if need */
> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + if (i2c->cdata->version < ID_X1000) {
> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + }
>
> /* disable all interrupts first */
> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
> @@ -399,11 +428,18 @@ static int jz4780_i2c_prepare(struct jz4780_i2c
> *i2c)
> return jz4780_i2c_enable(i2c);
> }
>
> -static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int
> cmd_count)
> +static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c,
> + int cmd_count, int cmd_left)

Sorry to be pedantic ;) but this line is not properly indented. You
should indent with tab charaters (configure your IDE for one tab == 4
spaces) as much as possible, then use spaces to align the first word.

With these two things fixed:
Acked-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul


> {
> int i;
>
> - for (i = 0; i < cmd_count; i++)
> + for (i = 0; i < cmd_count - 1; i++)
> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
> +
> + if ((cmd_left == 0) && (i2c->cdata->version >= ID_X1000))
> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
> + JZ4780_I2C_DC_READ | X1000_I2C_DC_STOP);
> + else
> jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
> }
>
> @@ -458,37 +494,44 @@ static irqreturn_t jz4780_i2c_irq(int irqno,
> void *dev_id)
>
> rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
>
> - if (rd_left <= JZ4780_I2C_FIFO_LEN)
> + if (rd_left <= i2c->cdata->fifosize)
> jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
> }
>
> if (intst & JZ4780_I2C_INTST_TXEMP) {
> if (i2c->is_write == 0) {
> int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
> - int max_send = (JZ4780_I2C_FIFO_LEN - 1)
> + int max_send = (i2c->cdata->fifosize - 1)
> - (i2c->rd_cmd_xfered
> - i2c->rd_data_xfered);
> int cmd_to_send = min(cmd_left, max_send);
>
> if (i2c->rd_cmd_xfered != 0)
> cmd_to_send = min(cmd_to_send,
> - JZ4780_I2C_FIFO_LEN
> - - TX_LEVEL - 1);
> + i2c->cdata->fifosize
> + - i2c->cdata->tx_level - 1);
>
> if (cmd_to_send) {
> - jz4780_i2c_send_rcmd(i2c, cmd_to_send);
> i2c->rd_cmd_xfered += cmd_to_send;
> + cmd_left = i2c->rd_total_len -
> + i2c->rd_cmd_xfered;
> + jz4780_i2c_send_rcmd(i2c,
> + cmd_to_send, cmd_left);
> +
> }
>
> - cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
> if (cmd_left == 0) {
> intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
> intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
>
> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + if (i2c->cdata->version < ID_X1000) {
> + tmp = jz4780_i2c_readw(i2c,
> + JZ4780_I2C_CTRL);
> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> + jz4780_i2c_writew(i2c,
> + JZ4780_I2C_CTRL, tmp);
> + }
> }
> } else {
> unsigned short data;
> @@ -497,23 +540,26 @@ static irqreturn_t jz4780_i2c_irq(int irqno,
> void *dev_id)
> i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
>
> while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
> - (i2c->wt_len > 0)) {
> + (i2c->wt_len > 0)) {
> i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
> data = *i2c->wbuf;
> data &= ~JZ4780_I2C_DC_READ;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
> - data);
> + if ((!i2c->stop_hold) && (i2c->cdata->version >=
> + ID_X1000))
> + data |= X1000_I2C_DC_STOP;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC, data);
> i2c->wbuf++;
> i2c->wt_len--;
> }
>
> if (i2c->wt_len == 0) {
> - if (!i2c->stop_hold) {
> + if ((!i2c->stop_hold) && (i2c->cdata->version <
> + ID_X1000)) {
> tmp = jz4780_i2c_readw(i2c,
> - JZ4780_I2C_CTRL);
> + JZ4780_I2C_CTRL);
> tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
> - tmp);
> + jz4780_i2c_writew(i2c,
> + JZ4780_I2C_CTRL, tmp);
> }
>
> jz4780_i2c_trans_done(i2c);
> @@ -567,20 +613,22 @@ static inline int jz4780_i2c_xfer_read(struct
> jz4780_i2c *i2c,
> i2c->rd_data_xfered = 0;
> i2c->rd_cmd_xfered = 0;
>
> - if (len <= JZ4780_I2C_FIFO_LEN)
> + if (len <= i2c->cdata->fifosize)
> jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
> else
> - jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
> + jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, i2c->cdata->rx_level);
>
> - jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
> + jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
>
> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
> JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
> | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
>
> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> - tmp |= JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + if (i2c->cdata->version < ID_X1000) {
> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> + tmp |= JZ4780_I2C_CTRL_STPHLD;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + }
>
> spin_unlock_irqrestore(&i2c->lock, flags);
>
> @@ -626,14 +674,16 @@ static inline int jz4780_i2c_xfer_write(struct
> jz4780_i2c *i2c,
> i2c->wbuf = buf;
> i2c->wt_len = len;
>
> - jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
> + jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
>
> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
> | JZ4780_I2C_INTM_MTXABT);
>
> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> - tmp |= JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + if (i2c->cdata->version < ID_X1000) {
> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> + tmp |= JZ4780_I2C_CTRL_STPHLD;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + }
>
> spin_unlock_irqrestore(&i2c->lock, flags);
>
> @@ -716,8 +766,25 @@ static const struct i2c_algorithm
> jz4780_i2c_algorithm = {
> .functionality = jz4780_i2c_functionality,
> };
>
> +static const struct ingenic_i2c_config jz4780_i2c_config = {
> + .version = ID_JZ4780,
> +
> + .fifosize = JZ4780_I2C_FIFO_LEN,
> + .tx_level = JZ4780_I2C_FIFO_LEN / 2,
> + .rx_level = JZ4780_I2C_FIFO_LEN / 2 - 1,
> +};
> +
> +static const struct ingenic_i2c_config x1000_i2c_config = {
> + .version = ID_X1000,
> +
> + .fifosize = X1000_I2C_FIFO_LEN,
> + .tx_level = X1000_I2C_FIFO_LEN / 2,
> + .rx_level = X1000_I2C_FIFO_LEN / 2 - 1,
> +};
> +
> static const struct of_device_id jz4780_i2c_of_matches[] = {
> - { .compatible = "ingenic,jz4780-i2c", },
> + { .compatible = "ingenic,jz4780-i2c", .data = &jz4780_i2c_config },
> + { .compatible = "ingenic,x1000-i2c", .data = &x1000_i2c_config },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
> @@ -734,6 +801,12 @@ static int jz4780_i2c_probe(struct
> platform_device *pdev)
> if (!i2c)
> return -ENOMEM;
>
> + i2c->cdata = device_get_match_data(&pdev->dev);
> + if (!i2c->cdata) {
> + dev_err(&pdev->dev, "Error: No device match found\n");
> + return -ENODEV;
> + }
> +
> i2c->adap.owner = THIS_MODULE;
> i2c->adap.algo = &jz4780_i2c_algorithm;
> i2c->adap.algo_data = i2c;
> @@ -777,9 +850,11 @@ static int jz4780_i2c_probe(struct
> platform_device *pdev)
>
> dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
>
> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + if (i2c->cdata->version < ID_X1000) {
> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
> + }
>
> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
>
> --
> 2.7.4
>


\
 
 \ /
  Last update: 2019-12-16 14:57    [W:0.048 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site