lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 1/3] clocksource: davinci: work around a clocksource problem on dm365 SoC
From
Date
On 12/13/19 10:24 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> The DM365 platform has a strange quirk (only present when using ancient
> u-boot - mainline u-boot v2013.01 and later works fine) where if we
> enable the second half of the timer in periodic mode before we do its
> initialization - the time won't start flowing and we can't boot.
>
> When using more recent u-boot, we can enable the timer, then reinitialize
> it and all works fine.
>
> I've been unable to figure out why that is, but a workaround for this
> is straightforward - just cache the enable bits for tim34.


I had a hard time groking this code. See suggested changes below for
something that would make the intention more clear (to me at least).


>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/clocksource/timer-davinci.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
> index 62745c962049..1c22443acaeb 100644
> --- a/drivers/clocksource/timer-davinci.c
> +++ b/drivers/clocksource/timer-davinci.c
> @@ -64,6 +64,8 @@ static struct {
> unsigned int tim_off;
> } davinci_clocksource;
>
> +static unsigned int davinci_clocksource_tim32_mode;

static unsigned bool davinci_clocksource_initialized;

> +
> static struct davinci_clockevent *
> to_davinci_clockevent(struct clock_event_device *clockevent)
> {
> @@ -94,7 +96,7 @@ static void davinci_tim12_shutdown(void __iomem *base)
> * halves. In this case TIM34 runs in periodic mode and we must
> * not modify it.
> */
> - tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
> + tcr |= davinci_clocksource_tim32_mode <<
> DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;

if (davinci_clocksource_initialized)
tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;

>
> writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
> @@ -107,7 +109,7 @@ static void davinci_tim12_set_oneshot(void __iomem *base)
> tcr = DAVINCI_TIMER_ENAMODE_ONESHOT <<
> DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
> /* Same as above. */
> - tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
> + tcr |= davinci_clocksource_tim32_mode <<
> DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;

if (davinci_clocksource_initialized)
tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;

>
> writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
> @@ -206,6 +208,8 @@ static void davinci_clocksource_init_tim34(void __iomem *base)
> writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
> writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD34);
> writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
> +
> + davinci_clocksource_tim32_mode = DAVINCI_TIMER_ENAMODE_PERIODIC;


davinci_clocksource_initialized = true;

> }
>
> /*
>

\
 
 \ /
  Last update: 2019-12-16 19:44    [W:0.079 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site