lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] fmc: remove left-over ipmi-fru.h after fmc deletion
Acked-by: Federico Vaga <federico.vaga@cern.ch>

On Sat, Dec 14, 2019 at 12:49:13PM +0100, Lukas Bulwahn wrote:
>Commit 6a80b30086b8 ("fmc: Delete the FMC subsystem") from Linus Walleij
>deleted the obsolete FMC subsystem, but missed the MAINTAINERS entry and
>include/linux/ipmi-fru.h mentioned in the MAINTAINERS entry.
>
>Later, commit d5d4aa1ec198 ("MAINTAINERS: Remove FMC subsystem") from
>Denis Efremov cleaned up the MAINTAINERS entry, but actually also missed
>that include/linux/ipmi-fru.h should also be deleted while deleting its
>reference in MAINTAINERS.
>
>So, deleting include/linux/ipmi-fru.h slipped through the previous
>clean-ups.
>
>As there is no further use for include/linux/ipmi-fru.h, finally delete
>include/linux/ipmi-fru.h for good now.
>
>Fixes: d5d4aa1ec198 ("MAINTAINERS: Remove FMC subsystem")
>Fixes: 6a80b30086b8 ("fmc: Delete the FMC subsystem")
>Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
>---
>Linus, please pick this patch.
>Federico, Denis, please ack.
>
> include/linux/ipmi-fru.h | 134 ---------------------------------------
> 1 file changed, 134 deletions(-)
> delete mode 100644 include/linux/ipmi-fru.h
>
>diff --git a/include/linux/ipmi-fru.h b/include/linux/ipmi-fru.h
>deleted file mode 100644
>index 05c9422624c6..000000000000
>--- a/include/linux/ipmi-fru.h
>+++ /dev/null
>@@ -1,134 +0,0 @@
>-/* SPDX-License-Identifier: GPL-2.0+ */
>-/*
>- * Copyright (C) 2012 CERN (www.cern.ch)
>- * Author: Alessandro Rubini <rubini@gnudd.com>
>- *
>- * This work is part of the White Rabbit project, a research effort led
>- * by CERN, the European Institute for Nuclear Research.
>- */
>-#ifndef __LINUX_IPMI_FRU_H__
>-#define __LINUX_IPMI_FRU_H__
>-#ifdef __KERNEL__
>-# include <linux/types.h>
>-# include <linux/string.h>
>-#else
>-# include <stdint.h>
>-# include <string.h>
>-#endif
>-
>-/*
>- * These structures match the unaligned crap we have in FRU1011.pdf
>- * (http://download.intel.com/design/servers/ipmi/FRU1011.pdf)
>- */
>-
>-/* chapter 8, page 5 */
>-struct fru_common_header {
>- uint8_t format; /* 0x01 */
>- uint8_t internal_use_off; /* multiple of 8 bytes */
>- uint8_t chassis_info_off; /* multiple of 8 bytes */
>- uint8_t board_area_off; /* multiple of 8 bytes */
>- uint8_t product_area_off; /* multiple of 8 bytes */
>- uint8_t multirecord_off; /* multiple of 8 bytes */
>- uint8_t pad; /* must be 0 */
>- uint8_t checksum; /* sum modulo 256 must be 0 */
>-};
>-
>-/* chapter 9, page 5 -- internal_use: not used by us */
>-
>-/* chapter 10, page 6 -- chassis info: not used by us */
>-
>-/* chapter 13, page 9 -- used by board_info_area below */
>-struct fru_type_length {
>- uint8_t type_length;
>- uint8_t data[0];
>-};
>-
>-/* chapter 11, page 7 */
>-struct fru_board_info_area {
>- uint8_t format; /* 0x01 */
>- uint8_t area_len; /* multiple of 8 bytes */
>- uint8_t language; /* I hope it's 0 */
>- uint8_t mfg_date[3]; /* LSB, minutes since 1996-01-01 */
>- struct fru_type_length tl[0]; /* type-length stuff follows */
>-
>- /*
>- * the TL there are in order:
>- * Board Manufacturer
>- * Board Product Name
>- * Board Serial Number
>- * Board Part Number
>- * FRU File ID (may be null)
>- * more manufacturer-specific stuff
>- * 0xc1 as a terminator
>- * 0x00 pad to a multiple of 8 bytes - 1
>- * checksum (sum of all stuff module 256 must be zero)
>- */
>-};
>-
>-enum fru_type {
>- FRU_TYPE_BINARY = 0x00,
>- FRU_TYPE_BCDPLUS = 0x40,
>- FRU_TYPE_ASCII6 = 0x80,
>- FRU_TYPE_ASCII = 0xc0, /* not ascii: depends on language */
>-};
>-
>-/*
>- * some helpers
>- */
>-static inline struct fru_board_info_area *fru_get_board_area(
>- const struct fru_common_header *header)
>-{
>- /* we know for sure that the header is 8 bytes in size */
>- return (struct fru_board_info_area *)(header + header->board_area_off);
>-}
>-
>-static inline int fru_type(struct fru_type_length *tl)
>-{
>- return tl->type_length & 0xc0;
>-}
>-
>-static inline int fru_length(struct fru_type_length *tl)
>-{
>- return (tl->type_length & 0x3f) + 1; /* len of whole record */
>-}
>-
>-/* assume ascii-latin1 encoding */
>-static inline int fru_strlen(struct fru_type_length *tl)
>-{
>- return fru_length(tl) - 1;
>-}
>-
>-static inline char *fru_strcpy(char *dest, struct fru_type_length *tl)
>-{
>- int len = fru_strlen(tl);
>- memcpy(dest, tl->data, len);
>- dest[len] = '\0';
>- return dest;
>-}
>-
>-static inline struct fru_type_length *fru_next_tl(struct fru_type_length *tl)
>-{
>- return tl + fru_length(tl);
>-}
>-
>-static inline int fru_is_eof(struct fru_type_length *tl)
>-{
>- return tl->type_length == 0xc1;
>-}
>-
>-/*
>- * External functions defined in fru-parse.c.
>- */
>-extern int fru_header_cksum_ok(struct fru_common_header *header);
>-extern int fru_bia_cksum_ok(struct fru_board_info_area *bia);
>-
>-/* All these 4 return allocated strings by calling fru_alloc() */
>-extern char *fru_get_board_manufacturer(struct fru_common_header *header);
>-extern char *fru_get_product_name(struct fru_common_header *header);
>-extern char *fru_get_serial_number(struct fru_common_header *header);
>-extern char *fru_get_part_number(struct fru_common_header *header);
>-
>-/* This must be defined by the caller of the above functions */
>-extern void *fru_alloc(size_t size);
>-
>-#endif /* __LINUX_IMPI_FRU_H__ */
>--
>2.17.1
>

\
 
 \ /
  Last update: 2019-12-16 09:52    [W:0.062 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site