lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] libata: Fix retrieving of active qcs
On Fri, Dec 13, 2019 at 09:03:34AM +0100, Sascha Hauer wrote:
> ata_qc_complete_multiple() is called with a mask of the still active
> tags.
>
> mv_sata doesn't have this information directly and instead calculates
> the still active tags from the started tags (ap->qc_active) and the
> finished tags as (ap->qc_active ^ done_mask)
>
> Since 28361c40368 the hw_tag and tag are no longer the same and the
> equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
> initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
> started and this will be in done_mask on completion. ap->qc_active ^
> done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
> the internal tag will never be reported as completed.
>
> This is fixed by introducing ata_qc_get_active() which returns the
> active hardware tags and calling it where appropriate.
>
> This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
> problem. There is another case in sata_nv that most likely needs fixing
> as well, but this looks a little different, so I wasn't confident enough
> to change that.
>
> Fixes: 28361c403683 ("libata: add extra internal command")
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---

Ignore this, it lacks the v2 tag :-/

Sascha


--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2019-12-13 09:05    [W:0.022 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site