lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
On Fri, Dec 06, 2019 at 04:20:05PM +0530, Nagarjuna Kristam wrote:
> Add device-tree binding documentation for the XUSB device mode controller
> present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0
> specification.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---

Next time version your patches correctly and include version history
here so I don't have to go look up why my R-by is missing.

> .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 204 +++++++++++++++++++++
> 1 file changed, 204 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> new file mode 100644
> index 0000000..b23c451
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
> @@ -0,0 +1,204 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings please:

(GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
> +
> +description:
> + The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
> + USB 3.0 SuperSpeed protocols.
> +
> +maintainers:
> + - Nagarjuna Kristam <nkristam@nvidia.com>
> + - JC Kuo <jckuo@nvidia.com>
> + - Thierry Reding <treding@nvidia.com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: nvidia,tegra210-xudc # For Tegra210
> + - items:
> + - const: nvidia,tegra186-xudc # For Tegra186

Use 'enum' instead of oneOf+const.

> +
> + interrupts:
> + maxItems: 1
> + description: Must contain the XUSB device interrupt.

Don't need a description for a single interrupt line.

> +
> + power-domains:
> + maxItems: 2
> + description:
> + A list of PM domain specifiers that reference each power-domain
> + used by the XUSB device mode controller. This list must comprise of a
> + specifier for the XUSBA and XUSBB power-domains.
> + See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
> + for details.

Just need:

items:
- description: XUSBA power-domain
- description: XUSBB power-domain

> +
> + power-domains-names:
> + maxItems: 2
> + description:
> + A list of names that represent each of the specifiers in
> + the 'power-domains' property.

That's every 'power-domains-names'.

> + items:
> + - const: ss
> + - const: dev

Okay, but those names don't match up with XUSBA and XUSBB. Names should
be meaningful or local to the module, not the provider if that helps.

> +
> + nvidia,xusb-padctl:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + phandle to the XUSB pad controller that is used to configure the USB pads
> + used by the XUDC controller.
> +
> + phys:
> + minItems: 1
> + description:
> + Must contain an entry for each entry in phy-names.
> + See ../phy/phy-bindings.txt for details.
> +
> + phy-names:
> + minItems: 1
> + items:
> + - const: usb2-0
> + - const: usb2-1
> + - const: usb2-2
> + - const: usb2-3
> + - const: usb3-0
> + - const: usb3-1
> + - const: usb3-2
> + - const: usb3-3
> +
> + avddio-usb-supply:
> + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
> +
> + hvdd-usb-supply:
> + description: USB controller power supply. Must supply 3.3 V.
> +
> +required:
> + - compatible
> + - power-domains
> + - power-domain-names
> + - nvidia,xusb-padctl
> + - phys
> + - phy-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + items:
> + const: nvidia,tegra210-xudc
> +
> + then:
> + properties:
> + reg:
> + maxItems: 3
> + items:
> + - description: XUSB device controller registers
> + - description: XUSB device PCI Config registers
> + - description: XUSB device registers.
> + reg-names:
> + maxItems: 3
> + items:
> + - const: base
> + - const: fpci
> + - const: ipfs

As these are a superset of tegra186, you can move this up and tegra186
just needs to define 'maxItems: 2'.

> + clocks:
> + description:
> + Must contain an entry for all clocks used. See ../clock/clock-bindings.txt
> + for details.
> + maxItems: 5
> + items:
> + - description: Clock to enable core XUSB dev clock.
> + - description: Clock to enable XUSB super speed clock.
> + - description: Clock to enable XUSB super speed dev clock.
> + - description: Clock to enable XUSB high speed dev clock.
> + - description: Clock to enable XUSB full speed dev clock.
> + clock-names:
> + items:
> + - const: dev
> + - const: ss
> + - const: ss_src
> + - const: hs_src
> + - const: fs_src

I would re-order the last 2 entries so that you can do the same thing as
I said for 'reg'.

> + required:
> + - reg
> + - reg-names
> + - clocks
> + - clock-names

No need for these to be under the if. They are always required and
don't have to be where defined by 'properties'.

> + - avddio-usb-supply
> + - hvdd-usb-supply
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: nvidia,tegra186-xudc
> +
> + then:
> + properties:
> + reg:
> + maxItems: 2
> + items:
> + - description: XUSB device controller registers
> + - description: XUSB device PCI Config registers
> + reg-names:
> + maxItems: 2
> + items:
> + - const: base
> + - const: fpci
> + clocks:
> + description:
> + Must contain an entry for all clocks used. See ../clock/clock-bindings.txt
> + for details.
> + maxItems: 4
> + items:
> + - description: Clock to enable core XUSB dev clock.
> + - description: Clock to enable XUSB super speed clock.
> + - description: Clock to enable XUSB super speed dev clock.
> + - description: Clock to enable XUSB full speed dev clock.
> + clock-names:
> + items:
> + - const: dev
> + - const: ss
> + - const: ss_src
> + - const: fs_src
> + required:
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/tegra210-car.h>
> + #include <dt-bindings/gpio/tegra-gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + usb@700d0000 {
> + compatible = "nvidia,tegra210-xudc";
> + reg = <0x0 0x700d0000 0x0 0x8000>,
> + <0x0 0x700d8000 0x0 0x1000>,
> + <0x0 0x700d9000 0x0 0x1000>;
> + reg-names = "base", "fpci", "ipfs";
> +
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
> + <&tegra_car TEGRA210_CLK_XUSB_SS>,
> + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
> + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
> + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>;
> + clock-names = "dev", "ss", "ss_src", "hs_src", "fs_src";
> +
> + power-domains = <&pd_xusbdev>, <&pd_xusbss>;
> + power-domain-names = "dev", "ss";
> +
> + nvidia,xusb-padctl = <&padctl>;
> +
> + phys = <&micro_b>;
> + phy-names = "usb2-0";
> +
> + avddio-usb-supply = <&vdd_pex_1v05>;
> + hvdd-usb-supply = <&vdd_3v3_sys>;
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-12-13 19:46    [W:0.189 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site