Messages in this thread | | | Date | Thu, 12 Dec 2019 07:17:42 +0000 | From | rkambl@codeauro ... | Subject | Re: [PATCH v2 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180 |
| |
On 2019-12-12 01:03, Doug Anderson wrote: > Hi, > > On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@codeaurora.org> > wrote: >> >> Add TSENS node and user thermal zone for TSENS sensors in SC7180. >> >> Signed-off-by: Rajeshwari <rkambl@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sc7180.dtsi | 527 >> +++++++++++++++++++++++++++++++++++ >> 1 file changed, 527 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> index 666e9b9..6656ffc 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> @@ -911,6 +911,26 @@ >> status = "disabled"; >> }; >> >> + tsens0: thermal-sensor@c263000 { >> + compatible = >> "qcom,sc7180-tsens","qcom,tsens-v2"; >> + reg = <0 0x0c263000 0 0x1ff>, /* TM */ >> + <0 0x0c222000 0 0x1ff>; /* SROT */ >> + #qcom,sensors = <15>; >> + interrupts = <GIC_SPI 506 >> IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "uplow"; > > Can you also send a patch to match Amit's ("arm64: dts: sdm845: > thermal: Add critical interrupt support") [1]. If I'm reading things > correctly it should be 508 for tsens0 and 509 for tsens1 just like on > sdm845. > > [1] > https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@linaro.org
yes, i will send the patch for critical interrupt support. > > > Thanks! > > -Rajeshwari
| |