lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] habanalabs: remove variable 'val' set but not used
On Tue, Dec 10, 2019 at 1:00 PM Chen Wandun <chenwandun@huawei.com> wrote:
>
> Fixes gcc '-Wunused-but-set-variable' warning:
>
> drivers/misc/habanalabs/goya/goya.c: In function goya_pldm_init_cpu:
> drivers/misc/habanalabs/goya/goya.c:2195:6: warning: variable val set but not used [-Wunused-but-set-variable]
> drivers/misc/habanalabs/goya/goya.c: In function goya_hw_init:
> drivers/misc/habanalabs/goya/goya.c:2505:6: warning: variable val set but not used [-Wunused-but-set-variable]
>
> Fixes: 9494a8dd8d22 ("habanalabs: add h/w queues module")
> Signed-off-by: Chen Wandun <chenwandun@huawei.com>
> ---
> drivers/misc/habanalabs/goya/goya.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
> index c8d16aa..7344e8a 100644
> --- a/drivers/misc/habanalabs/goya/goya.c
> +++ b/drivers/misc/habanalabs/goya/goya.c
> @@ -2192,7 +2192,7 @@ static int goya_push_linux_to_device(struct hl_device *hdev)
>
> static int goya_pldm_init_cpu(struct hl_device *hdev)
> {
> - u32 val, unit_rst_val;
> + u32 unit_rst_val;
> int rc;
>
> /* Must initialize SRAM scrambler before pushing u-boot to SRAM */
> @@ -2200,14 +2200,14 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
>
> /* Put ARM cores into reset */
> WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL, CPU_RESET_ASSERT);
> - val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
> + RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
>
> /* Reset the CA53 MACRO */
> unit_rst_val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
> WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, CA53_RESET);
> - val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
> + RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
> WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, unit_rst_val);
> - val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
> + RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
>
> rc = goya_push_uboot_to_device(hdev);
> if (rc)
> @@ -2228,7 +2228,7 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
> /* Release ARM core 0 from reset */
> WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL,
> CPU_RESET_CORE0_DEASSERT);
> - val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
> + RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
>
> return 0;
> }
> @@ -2502,13 +2502,12 @@ int goya_mmu_init(struct hl_device *hdev)
> static int goya_hw_init(struct hl_device *hdev)
> {
> struct asic_fixed_properties *prop = &hdev->asic_prop;
> - u32 val;
> int rc;
>
> dev_info(hdev->dev, "Starting initialization of H/W\n");
>
> /* Perform read from the device to make sure device is up */
> - val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
> + RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
>
> /*
> * Let's mark in the H/W that we have reached this point. We check
> @@ -2560,7 +2559,7 @@ static int goya_hw_init(struct hl_device *hdev)
> goto disable_queues;
>
> /* Perform read from the device to flush all MSI-X configuration */
> - val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
> + RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
>
> return 0;
>
> --
> 2.7.4
>

Thanks!
Applied to -fixes
Oded

\
 
 \ /
  Last update: 2019-12-13 03:10    [W:0.046 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site