lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] net-next: dt-binding: dwmac-mediatek: add more description for RMII
Date
MT2712 SoC can provides RMII reference clock,
so add corresponding description in dt-binding.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
---
.../devicetree/bindings/net/mediatek-dwmac.txt | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
index 8a08621a5b54..34f692ea0406 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
@@ -14,7 +14,9 @@ Required properties:
Should be "macirq" for the main MAC IRQ
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: The name of the clock listed in the clocks property. These are
- "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC
+ "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC.
+ "rmii_internal" is optional, only for RMII when the reference clock is
+ from MT2712 SoC.
- mac-address: See ethernet.txt in the same directory
- phy-mode: See ethernet.txt in the same directory
- mediatek,pericfg: A phandle to the syscon node that control ethernet
@@ -23,8 +25,10 @@ Required properties:
Optional properties:
- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
It should be defined for RGMII/MII interface.
+ It should be defined for RMII interface when the reference clock is from MT2712 SoC.
- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
- It should be defined for RGMII/MII/RMII interface.
+ It should be defined for RGMII/MII interface.
+ It should be defined for RMII interface.
Both delay properties need to be a multiple of 170 for RGMII interface,
or will round down. Range 0~31*170.
Both delay properties need to be a multiple of 550 for MII/RMII interface,
@@ -34,13 +38,20 @@ or will round down. Range 0~31*550.
reference clock, which is from external PHYs, is connected to RXC pin
on MT2712 SoC.
Otherwise, is connected to TXC pin.
+- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
+ MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
- mediatek,txc-inverse: boolean property, if present indicates that
1. tx clock will be inversed in MII/RGMII case,
2. tx clock inside MAC will be inversed relative to reference clock
which is from external PHYs in RMII case, and it rarely happen.
+ 3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+ when the reference clock is from MT2712 SoC.
- mediatek,rxc-inverse: boolean property, if present indicates that
1. rx clock will be inversed in MII/RGMII case.
- 2. reference clock will be inversed when arrived at MAC in RMII case.
+ 2. reference clock will be inversed when arrived at MAC in RMII case, when
+ the reference clock is from external PHYs.
+ 3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+ the reference clock is from MT2712 SoC.
- assigned-clocks: mac_main and ptp_ref clocks
- assigned-clock-parents: parent clocks of the assigned clocks

--
2.18.0
\
 
 \ /
  Last update: 2019-12-12 03:43    [W:0.042 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site