lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
Date
Add DT bindings for PCIe controller implemented in UniPhier SoCs
when configured in endpoint mode. This controller is based on
the DesignWare PCIe core.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../devicetree/bindings/pci/uniphier-pcie-ep.txt | 47 ++++++++++++++++++++++
MAINTAINERS | 2 +-
2 files changed, 48 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt

diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
new file mode 100644
index 00000000..56cb891
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
@@ -0,0 +1,47 @@
+Socionext UniPhier PCIe endpoint controller bindings
+
+This describes the devicetree bindings for PCIe endpoint controller
+implemented on Socionext UniPhier SoCs.
+
+UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+PCI core. It shares common functions with the PCIe DesignWare core driver
+and inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+Required properties:
+- compatible: Should be
+ "socionext,uniphier-pro5-pcie-ep" for Pro5 SoC
+- reg: Specifies offset and length of the register set for the device.
+ According to the reg-names, appropriate register sets are required.
+- reg-names: Must include the following entries:
+ "dbi" - controller configuration registers
+ "dbi2" - controller configuration registers for shadow
+ "link" - SoC-specific glue layer registers
+ "addr_space" - PCIe configuration space
+- clocks: A phandle to the clock gate for PCIe glue layer including
+ the endpoint controller.
+- resets: A phandle to the reset line for PCIe glue layer including
+ the endpoint controller.
+
+Optional properties:
+- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
+ phys are required.
+- phy-names: Must be "pcie-phy".
+
+Example:
+
+ pcie_ep: pcie-ep@66000000 {
+ compatible = "socionext,uniphier-pro5-pcie-ep",
+ "snps,dw-pcie-ep";
+ status = "disabled";
+ reg-names = "dbi", "dbi2", "link", "addr_space";
+ reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+ <0x66010000 0x10000>, <0x67000000 0x400000>;
+ clocks = <&sys_clk 24>;
+ resets = <&sys_rst 24>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ num-lanes = <4>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d3a5c5..4b6ec28 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12694,7 +12694,7 @@ PCIE DRIVER FOR SOCIONEXT UNIPHIER
M: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
L: linux-pci@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+F: Documentation/devicetree/bindings/pci/uniphier-pcie*.txt
F: drivers/pci/controller/dwc/pcie-uniphier.c

PCIE DRIVER FOR ST SPEAR13XX
--
2.7.4
\
 
 \ /
  Last update: 2019-12-12 03:03    [W:0.047 / U:1.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site