lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] USB: core: Attempt power cycle port when it's in eSS.Disabled state
On Wed, 11 Dec 2019, Kai-Heng Feng wrote:

>
>
> > On Nov 30, 2019, at 01:41, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
> >
> > On Dell TB16, Realtek USB ethernet (r8152) connects to an SMSC hub which
> > then connects to ASMedia xHCI's root hub:
> >
> > /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
> > |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 5000M
> > |__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
> >
> > Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> > Bus 004 Device 002: ID 0424:5537 Standard Microsystems Corp. USB5537B
> > Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
> >
> > The SMSC hub may disconnect after system resume from suspend. When this
> > happens, the reset resume attempt fails, and the last resort to disable
> > the port and see something comes up later, also fails.
> >
> > When the issue occurs, the link state stays in eSS.Disabled state
> > despite the warm reset attempts. Accoding to spec this can be caused by
> > invalid VBus, after some expiremets, the SMSC hub can be brought back
> > after a powercycle.
> >
> > So let's power cycle the port at the end of reset resume attempt, if
> > it's in eSS.Disabled state.
>
> If there's no objection, can this fix be reviewed and merged?
>
> Kai-Heng

The patch is okay as far as I'm concerned, since it doesn't do anything
for non-SuperSpeed connections. It should be reviewed by Mathias.

Alan Stern

> >
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
> > v2:
> > - Lower dev_info() to dev_dbg().
> >
> > drivers/usb/core/hub.c | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index 6b6cd76ac5e6..a2e6001046f5 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -2739,6 +2739,18 @@ static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
> > || link_state == USB_SS_PORT_LS_COMP_MOD;
> > }
> >
> > +static bool hub_port_power_cycle_required(struct usb_hub *hub, int port1,
> > + u16 portstatus)
> > +{
> > + u16 link_state;
> > +
> > + if (!hub_is_superspeed(hub->hdev))
> > + return false;
> > +
> > + link_state = portstatus & USB_PORT_STAT_LINK_STATE;
> > + return link_state == USB_SS_PORT_LS_SS_DISABLED;
> > +}
> > +
> > static void hub_port_power_cycle(struct usb_hub *hub, int port1)
> > {
> > struct usb_port *port_dev = hub->ports[port1 - 1];
> > @@ -3601,6 +3613,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
> > if (status < 0) {
> > dev_dbg(&udev->dev, "can't resume, status %d\n", status);
> > hub_port_logical_disconnect(hub, port1);
> > + if (hub_port_power_cycle_required(hub, port1, portstatus)) {
> > + dev_dbg(&udev->dev, "device in disabled state, attempt power cycle\n");
> > + hub_port_power_cycle(hub, port1);
> > + }
> > } else {
> > /* Try to enable USB2 hardware LPM */
> > usb_enable_usb2_hardware_lpm(udev);
> > --
> > 2.17.1

\
 
 \ /
  Last update: 2019-12-11 17:22    [W:0.059 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site