lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Linux-stm32] [PATCH v4 0/4] Genericize DW MIPI DSI bridge and add i.MX 6 driver
Date
On Fri, 06 Dec 2019, Philippe CORNU <philippe.cornu@st.com> wrote:
> Hi Adrian,
>
> And sorry for this late reply. Your patches look good and we
> ("stm guys") understand that v1.01 is very different to
> v1.30/31.
>
> We are doing our best to review & test your patches and we will
> go back to you asap. Many thanks, Philippe :-)

Hi Philippe,

Thank you for taking the time to test this, I really appreciate
it.

Adrian

>
>
> On 12/2/19 8:33 PM, Adrian Ratiu wrote:
>> Having a generic Synopsis DesignWare MIPI-DSI host controller bridge
>> driver is a very good idea, however the current implementation has
>> hardcoded quite a lot of the register layouts used by the two supported
>> SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31.
>>
>> This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6
>> which use older v1.01 cores or future versions because, based on history,
>> layout changes should also be expected in new DSI versions / SoCs.
>>
>> This patch series converts the bridge and platform drivers to access
>> registers via generic regmap APIs and allows each platform driver to
>> configure its register layout via struct reg_fields, then adds support
>> for the host controller found on i.MX 6.
>>
>> I only have i.MX hardware with MIPI-DSI panel and relevant documentation
>> available for testing so I'll really appreciate it if someone could test
>> the series on Rockchip and STM... eyeballing register fields could only
>> get me so far, so sorry in advance for any breakage!
>>
>> Many thanks to Boris Brezillon <boris.brezillon@collabora.com> for
>> suggesting the regmap solution and to Liu Ying <Ying.Liu@freescale.com>
>> for doing the initial i.MX platform driver implementation.
>>
>> This series applies on top of latest linux-next tree, next-20191202.
>>
>> v3 -> v4:
>> * Added commmit message to dt-binding patch (Neil)
>> * Converted the dt-binding to yaml dt-schema format (Neil)
>> * Small DT node + driver fixes (Rob)
>> * Renamed platform driver to reflect it's only for i.MX v6 (Fabio)
>> * Added small panel example to the host controller DT binding
>>
>> v2 -> v3:
>> * Added const declarations to dw-mipi-dsi.c structs (Emil)
>> * Fixed Reviewed-by tags and cc'd some more relevant ML (Emil)
>>
>> v1 -> v2:
>> * Moved register definitions & regmap initialization into bridge
>> module. Platform drivers get the regmap via plat_data after calling
>> the bridge probe (Emil).
>>
>> Adrian Ratiu (4):
>> drm: bridge: dw_mipi_dsi: access registers via a regmap
>> drm: bridge: dw_mipi_dsi: abstract register access using reg_fields
>> drm: imx: Add i.MX 6 MIPI DSI host driver
>> dt-bindings: display: add i.MX6 MIPI DSI host controller doc
>>
>> .../display/imx/fsl,mipi-dsi-imx6.yaml | 136 ++++
>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 699 +++++++++++++-----
>> drivers/gpu/drm/imx/Kconfig | 7 +
>> drivers/gpu/drm/imx/Makefile | 1 +
>> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 378 ++++++++++
>> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 17 +-
>> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 34 +-
>> include/drm/bridge/dw_mipi_dsi.h | 2 +-
>> 8 files changed, 1067 insertions(+), 207 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
>> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
>>

\
 
 \ /
  Last update: 2019-12-10 12:43    [W:0.073 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site