Messages in this thread | | | Date | Tue, 10 Dec 2019 22:23:25 +0000 | From | Lina Iyer <> | Subject | Re: [PATCH 1/2] pinctrl: qcom: sc7180: Add GPIO wakeup interrupt map |
| |
On Wed, Oct 30 2019 at 01:07 -0600, Maulik Shah wrote: >GPIOs that can be configured as wakeup sources, have their >interrupt lines routed to PDC interrupt controller. > >Provide the interrupt map of the GPIO to its wakeup capable >interrupt parent. > >Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org>
>--- > drivers/pinctrl/qcom/pinctrl-sc7180.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > >diff --git a/drivers/pinctrl/qcom/pinctrl-sc7180.c b/drivers/pinctrl/qcom/pinctrl-sc7180.c >index 6399c8a..8a2b97c 100644 >--- a/drivers/pinctrl/qcom/pinctrl-sc7180.c >+++ b/drivers/pinctrl/qcom/pinctrl-sc7180.c >@@ -1097,6 +1097,22 @@ static const struct msm_pingroup sc7180_groups[] = { > [126] = SDC_QDSD_PINGROUP(sdc2_data, 0x97b000, 9, 0), > }; > >+static const struct msm_gpio_wakeirq_map sc7180_pdc_map[] = { >+ {0, 40}, {3, 50}, {4, 42}, {5, 70}, {6, 41}, {9, 35}, >+ {10, 80}, {11, 51}, {16, 20}, {21, 55}, {22, 90}, {23, 21}, >+ {24, 61}, {26, 52}, {28, 36}, {30, 100}, {31, 33}, {32, 81}, >+ {33, 62}, {34, 43}, {36, 91}, {37, 53}, {38, 63}, {39, 72}, >+ {41, 101}, {42, 7}, {43, 34}, {45, 73}, {47, 82}, {49, 17}, >+ {52, 109}, {53, 102}, {55, 92}, {56, 56}, {57, 57}, {58, 83}, >+ {59, 37}, {62, 110}, {63, 111}, {64, 74}, {65, 44}, {66, 93}, >+ {67, 58}, {68, 112}, {69, 32}, {70, 54}, {72, 59}, {73, 64}, >+ {74, 71}, {78, 31}, {82, 30}, {85, 103}, {86, 38}, {87, 39}, >+ {88, 45}, {89, 46}, {90, 47}, {91, 48}, {92, 60}, {93, 49}, >+ {94, 84}, {95, 94}, {98, 65}, {101, 66}, {104, 67}, {109, 104}, >+ {110, 68}, {113, 69}, {114, 113}, {115, 108}, {116, 121}, >+ {117, 114}, {118, 119}, >+}; >+ > static const struct msm_pinctrl_soc_data sc7180_pinctrl = { > .pins = sc7180_pins, > .npins = ARRAY_SIZE(sc7180_pins), >@@ -1107,6 +1123,8 @@ static const struct msm_pinctrl_soc_data sc7180_pinctrl = { > .ngpios = 120, > .tiles = sc7180_tiles, > .ntiles = ARRAY_SIZE(sc7180_tiles), >+ .wakeirq_map = sc7180_pdc_map, >+ .nwakeirq_map = ARRAY_SIZE(sc7180_pdc_map), > }; > > static int sc7180_pinctrl_probe(struct platform_device *pdev) >-- >QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >of Code Aurora Forum, hosted by The Linux Foundation >
| |