lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC-next 0/1] Odroid C2: Enable DVFS for cpu
On Tue, Dec 10, 2019 at 7:13 PM Kevin Hilman <khilman@baylibre.com> wrote:
>
> Anand Moon <linux.amoon@gmail.com> writes:
>
> > Hi Neil / Kevin,
> >
> > On Tue, 10 Dec 2019 at 14:13, Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> On 09/12/2019 23:12, Kevin Hilman wrote:
> >> > Anand Moon <linux.amoon@gmail.com> writes:
> >> >
> >> >> Some how this patch got lost, so resend this again.
> >> >>
> >> >> [0] https://patchwork.kernel.org/patch/11136545/
> >> >>
> >> >> This patch enable DVFS on GXBB Odroid C2.
> >> >>
> >> >> DVFS has been tested by running the arm64 cpuburn
> >> >> [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
> >> >> PM-QA testing
> >> >> [2] https://git.linaro.org/power/pm-qa.git [cpufreq testcase]
> >> >>
> >> >> Tested on latest U-Boot 2019.07-1 (Aug 01 2019 - 23:58:01 +0000) Arch Linux ARM
> >> >
> >> > Have you tested with the Harkernel u-boot?
> >> >
> >> > Last I remember, enabling CPUfreq will cause system hangs with the
> >> > Hardkernel u-boot because of improperly enabled frequencies, so I'm not
> >> > terribly inclined to merge this patch.
> >
> > HK u-boot have many issue with loading the kernel, with load address
> > *it's really hard to build the kernel for HK u-boot*,
> > to get the configuration correctly.
> >
> > Well I have tested with mainline u-boot with latest ATF .
> > I would prefer mainline u-boot for all the Amlogic SBC, since
> > they sync with latest driver changes.
>
> Yes, we would all prefer mainline u-boot, but the mainline kernel needs
> to support the vendor u-boot that is shipping with the boards. So
> until Hardkernel (and other vendors) switch to mainline u-boot we do not
> want to have upstream kernel defaults that will not boot with the vendor
> u-boot.
>
> We can always support these features, but they just cannot be enabled
> by default.
(I don't have an Odroid-C2 but I'm curious)
should Anand submit a patch to mainline u-boot instead? the
&scpi_clocks node could be enabled at runtime by mainline u-boot


Martin

\
 
 \ /
  Last update: 2019-12-10 21:07    [W:0.044 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site