lkml.org 
[lkml]   [2019]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] Bluetooth: hci_bcm: Disallow set_baudrate for BCM4354
Date
Without updating the patchram, the BCM4354 does not support a higher
operating speed. The normal bcm_setup follows the correct order
(init_speed, patchram and then oper_speed) but the serdev driver will
set the operating speed before calling the hu->setup function. Thus,
for the BCM4354, disallow setting the operating speed before patchram.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
---

Changes in v2: None

drivers/bluetooth/hci_bcm.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 0f851c0dde7f..2114df607cb3 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1167,7 +1167,7 @@ static int bcm_remove(struct platform_device *pdev)
return 0;
}

-static const struct hci_uart_proto bcm_proto = {
+static struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "Broadcom",
.manufacturer = 15,
@@ -1371,6 +1371,24 @@ static struct platform_driver bcm_driver = {
},
};

+#define BCM_QUIRK_DISALLOW_SET_BAUDRATE (1 << 0)
+const u32 disallow_set_baudrate = BCM_QUIRK_DISALLOW_SET_BAUDRATE;
+
+static int bcm_check_disallow_set_baudrate(struct serdev_device *serdev)
+{
+ const u32 *quirks = device_get_match_data(&serdev->dev);
+
+ if (quirks) {
+ /* BCM4354 can't run at full speed before patchram. Disallow
+ * externally setting operating speed.
+ */
+ if (*quirks & BCM_QUIRK_DISALLOW_SET_BAUDRATE)
+ return 1;
+ }
+
+ return 0;
+}
+
static int bcm_serdev_probe(struct serdev_device *serdev)
{
struct bcm_device *bcmdev;
@@ -1408,6 +1426,9 @@ static int bcm_serdev_probe(struct serdev_device *serdev)
if (err)
dev_err(&serdev->dev, "Failed to power down\n");

+ if (bcm_check_disallow_set_baudrate(serdev))
+ bcm_proto.set_baudrate = NULL;
+
return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
}

@@ -1424,7 +1445,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
{ .compatible = "brcm,bcm4345c5" },
{ .compatible = "brcm,bcm4330-bt" },
{ .compatible = "brcm,bcm43438-bt" },
- { .compatible = "brcm,bcm43540-bt" },
+ { .compatible = "brcm,bcm43540-bt", .data = &disallow_set_baudrate },
{ },
};
MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
--
2.24.0.rc1.363.gb1bccd3e3d-goog
\
 
 \ /
  Last update: 2019-11-08 00:29    [W:0.282 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site