lkml.org 
[lkml]   [2019]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] PCI: Allow building PCIe things without PCIEPORTBUS
Date
From: Bjorn Helgaas <bhelgaas@google.com>

Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the
PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not
selected. Remove the PCIEPORTBUS guard from building pcie/.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 28cdd8c0213a..522d2b974e91 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \
pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
setup-bus.o vc.o mmap.o setup-irq.o

+obj-$(CONFIG_PCI) += pcie/
+
ifdef CONFIG_PCI
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
@@ -15,7 +17,6 @@ endif

obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_PCI_QUIRKS) += quirks.o
-obj-$(CONFIG_PCIEPORTBUS) += pcie/
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_PCI_ATS) += ats.o
--
2.24.0.rc1.363.gb1bccd3e3d-goog
\
 
 \ /
  Last update: 2019-11-06 23:26    [W:0.092 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site