lkml.org 
[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 20/95] gpio: bd70528: Use correct unit for debounce times
Date
From: Thierry Reding <treding@nvidia.com>

commit f88c117b6d6d7e96557b6ee143b26b550fc51076 upstream.

The debounce time passed to gpiod_set_debounce() is specified in
microseconds, so make sure to use the correct unit when computing the
register values, which denote delays in milliseconds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Fixes: 18bc64b3aebf ("gpio: Initial support for ROHM bd70528 GPIO block")
[Bartosz: fixed a typo in commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpio/gpio-bd70528.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpio/gpio-bd70528.c
+++ b/drivers/gpio/gpio-bd70528.c
@@ -25,13 +25,13 @@ static int bd70528_set_debounce(struct b
case 0:
val = BD70528_DEBOUNCE_DISABLE;
break;
- case 1 ... 15:
+ case 1 ... 15000:
val = BD70528_DEBOUNCE_15MS;
break;
- case 16 ... 30:
+ case 15001 ... 30000:
val = BD70528_DEBOUNCE_30MS;
break;
- case 31 ... 50:
+ case 30001 ... 50000:
val = BD70528_DEBOUNCE_50MS;
break;
default:

\
 
 \ /
  Last update: 2019-11-27 22:09    [W:2.070 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site