lkml.org 
[lkml]   [2019]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/8] ACPI: thermal: switch to use <linux/temperature.h> helpers
From
Date
On 11/24/19 6:08 AM, Akinobu Mita wrote:
> This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin()
> and deci_kelvin_to_celsius() in <linux/temperature.h> instead of helpers
> in <linux/thermal.h>.
>
> This is preparation for centralizing the kelvin to/from Celsius conversion
> helpers in <linux/temprature.h>.
>
s/temprature/temperature/

Looks like this applies to all patches.

> Cc: Sujith Thomas <sujith.thomas@intel.com>
> Cc: Darren Hart <dvhart@infradead.org>
> Cc: Andy Shevchenko <andy@infradead.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@verdurent.com>
> Cc: Jean Delvare <jdelvare@suse.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Keith Busch <kbusch@kernel.org>
> Cc: Jens Axboe <axboe@fb.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Sagi Grimberg <sagi@grimberg.me>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
> drivers/acpi/thermal.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index d831a61..bd9b6eb 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -297,7 +297,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> if (crt == -1) {
> tz->trips.critical.flags.valid = 0;
> } else if (crt > 0) {
> - unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
> + unsigned long crt_k =
> + celsius_to_deci_kelvin(crt);
> +

> /*
> * Allow override critical threshold
> */
> @@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> if (psv == -1) {
> status = AE_SUPPORT;
> } else if (psv > 0) {
> - tmp = CELSIUS_TO_DECI_KELVIN(psv);
> + tmp = celsius_to_deci_kelvin(psv);
> status = AE_OK;
> } else {
> status = acpi_evaluate_integer(tz->device->handle,
> @@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> break;
> if (i == 1)
> tz->trips.active[0].temperature =
> - CELSIUS_TO_DECI_KELVIN(act);
> + celsius_to_deci_kelvin(act);
> else
> /*
> * Don't allow override higher than
> @@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> */
> tz->trips.active[i - 1].temperature =
> (tz->trips.active[i - 2].temperature <
> - CELSIUS_TO_DECI_KELVIN(act) ?
> + celsius_to_deci_kelvin(act) ?
> tz->trips.active[i - 2].temperature :
> - CELSIUS_TO_DECI_KELVIN(act));
> + celsius_to_deci_kelvin(act));
> break;
> } else {
> tz->trips.active[i].temperature = tmp;
> @@ -1087,7 +1089,8 @@ static int acpi_thermal_add(struct acpi_device *device)
> INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
>
> pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
> - acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
> + acpi_device_bid(device),
> + deci_kelvin_to_celsius(tz->temperature));
> goto end;
>
> free_memory:
>

\
 
 \ /
  Last update: 2019-11-24 16:19    [W:0.124 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site