lkml.org 
[lkml]   [2019]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCHv8 30/34] selftests/timens: Add a test for clock_nanosleep()
    Date
    From: Andrei Vagin <avagin@gmail.com>

    Check that clock_nanosleep() takes into account clock offsets.

    Output on success:
    1..4
    ok 1 clockid: 1 abs:0
    ok 2 clockid: 1 abs:1
    ok 3 clockid: 9 abs:0
    ok 4 clockid: 9 abs:1

    Output with lack of permissions:
    1..4
    not ok 1 # SKIP need to run as root

    Output without support of time namespaces:
    1..4
    not ok 1 # SKIP Time namespaces are not supported

    Signed-off-by: Andrei Vagin <avagin@gmail.com>
    Co-developed-by: Dmitry Safonov <dima@arista.com>
    Signed-off-by: Dmitry Safonov <dima@arista.com>
    ---
    tools/testing/selftests/timens/.gitignore | 1 +
    tools/testing/selftests/timens/Makefile | 4 +-
    .../selftests/timens/clock_nanosleep.c | 150 ++++++++++++++++++
    3 files changed, 153 insertions(+), 2 deletions(-)
    create mode 100644 tools/testing/selftests/timens/clock_nanosleep.c

    diff --git a/tools/testing/selftests/timens/.gitignore b/tools/testing/selftests/timens/.gitignore
    index b609f6ee9fb9..9b6c8ddac2c8 100644
    --- a/tools/testing/selftests/timens/.gitignore
    +++ b/tools/testing/selftests/timens/.gitignore
    @@ -1,2 +1,3 @@
    +clock_nanosleep
    timens
    timerfd
    diff --git a/tools/testing/selftests/timens/Makefile b/tools/testing/selftests/timens/Makefile
    index 293aed6be95e..40f630d46ca8 100644
    --- a/tools/testing/selftests/timens/Makefile
    +++ b/tools/testing/selftests/timens/Makefile
    @@ -1,6 +1,6 @@
    -TEST_GEN_PROGS := timens timerfd
    +TEST_GEN_PROGS := timens timerfd clock_nanosleep

    -CFLAGS := -Wall -Werror
    +CFLAGS := -Wall -Werror -pthread
    LDFLAGS := -lrt

    include ../lib.mk
    diff --git a/tools/testing/selftests/timens/clock_nanosleep.c b/tools/testing/selftests/timens/clock_nanosleep.c
    new file mode 100644
    index 000000000000..c6f871fb0704
    --- /dev/null
    +++ b/tools/testing/selftests/timens/clock_nanosleep.c
    @@ -0,0 +1,150 @@
    +// SPDX-License-Identifier: GPL-2.0
    +#define _GNU_SOURCE
    +#include <sched.h>
    +
    +#include <sys/timerfd.h>
    +#include <sys/syscall.h>
    +#include <time.h>
    +#include <unistd.h>
    +#include <stdlib.h>
    +#include <stdio.h>
    +#include <stdint.h>
    +#include <pthread.h>
    +#include <signal.h>
    +#include <string.h>
    +
    +#include "log.h"
    +#include "timens.h"
    +
    +void test_sig(int sig)
    +{
    + if (sig == SIGUSR2)
    + pthread_exit(NULL);
    +}
    +
    +struct thread_args {
    + struct timespec *now, *rem;
    + pthread_mutex_t *lock;
    + int clockid;
    + int abs;
    +};
    +
    +void *call_nanosleep(void *_args)
    +{
    + struct thread_args *args = _args;
    +
    + clock_nanosleep(args->clockid, args->abs ? TIMER_ABSTIME : 0, args->now, args->rem);
    + pthread_mutex_unlock(args->lock);
    + return NULL;
    +}
    +
    +int run_test(int clockid, int abs)
    +{
    + struct timespec now = {}, rem;
    + struct thread_args args = { .now = &now, .rem = &rem, .clockid = clockid};
    + struct timespec start;
    + pthread_mutex_t lock;
    + pthread_t thread;
    + int j, ok, ret;
    +
    + signal(SIGUSR1, test_sig);
    + signal(SIGUSR2, test_sig);
    +
    + pthread_mutex_init(&lock, NULL);
    + pthread_mutex_lock(&lock);
    +
    + if (clock_gettime(clockid, &start) == -1) {
    + if (errno == EINVAL && check_skip(clockid))
    + return 0;
    + return pr_perror("clock_gettime");
    + }
    +
    +
    + if (abs) {
    + now.tv_sec = start.tv_sec;
    + now.tv_nsec = start.tv_nsec;
    + }
    +
    + now.tv_sec += 3600;
    + args.abs = abs;
    + args.lock = &lock;
    + ret = pthread_create(&thread, NULL, call_nanosleep, &args);
    + if (ret != 0) {
    + pr_err("Unable to create a thread: %s", strerror(ret));
    + return 1;
    + }
    +
    + /* Wait when the thread will call clock_nanosleep(). */
    + ok = 0;
    + for (j = 0; j < 8; j++) {
    + /* The maximum timeout is about 5 seconds. */
    + usleep(10000 << j);
    +
    + /* Try to interrupt clock_nanosleep(). */
    + pthread_kill(thread, SIGUSR1);
    +
    + usleep(10000 << j);
    + /* Check whether clock_nanosleep() has been interrupted or not. */
    + if (pthread_mutex_trylock(&lock) == 0) {
    + /**/
    + ok = 1;
    + break;
    + }
    + }
    + if (!ok)
    + pthread_kill(thread, SIGUSR2);
    + pthread_join(thread, NULL);
    + pthread_mutex_destroy(&lock);
    +
    + if (!ok) {
    + ksft_test_result_pass("clockid: %d abs:%d timeout\n", clockid, abs);
    + return 1;
    + }
    +
    + if (rem.tv_sec < 3300 || rem.tv_sec > 3900) {
    + pr_fail("clockid: %d abs: %d remain: %ld\n",
    + clockid, abs, rem.tv_sec);
    + return 1;
    + }
    + ksft_test_result_pass("clockid: %d abs:%d\n", clockid, abs);
    +
    + return 0;
    +}
    +
    +int main(int argc, char *argv[])
    +{
    + int ret, nsfd;
    +
    + nscheck();
    +
    + ksft_set_plan(4);
    +
    + check_config_posix_timers();
    +
    + if (unshare_timens())
    + return 1;
    +
    + if (_settime(CLOCK_MONOTONIC, 7 * 24 * 3600))
    + return 1;
    + if (_settime(CLOCK_BOOTTIME, 9 * 24 * 3600))
    + return 1;
    +
    + nsfd = open("/proc/self/ns/time_for_children", O_RDONLY);
    + if (nsfd < 0)
    + return pr_perror("Unable to open timens_for_children");
    +
    + if (setns(nsfd, CLONE_NEWTIME))
    + return pr_perror("Unable to set timens");
    +
    + ret = 0;
    + ret |= run_test(CLOCK_MONOTONIC, 0);
    + ret |= run_test(CLOCK_MONOTONIC, 1);
    + ret |= run_test(CLOCK_BOOTTIME_ALARM, 0);
    + ret |= run_test(CLOCK_BOOTTIME_ALARM, 1);
    +
    + if (ret)
    + ksft_exit_fail();
    + ksft_exit_pass();
    + return ret;
    +}
    +
    --
    2.24.0
    \
     
     \ /
      Last update: 2019-11-12 02:29    [W:4.070 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site