Messages in this thread | | | From | Gregory CLEMENT <> | Subject | Re: [PATCH 0/3] ARM: dts: SDRAM and L2 cache EDAC for Armada SoCs | Date | Tue, 08 Oct 2019 11:57:27 +0200 |
| |
Hi Chris,
> This series was waiting for the armada_xp edac driver to be accepted. > Now that it has the relevant nodes can be added to the Armada SoCs. So > that boards can use the EDAC driver if they have the hardware support. > > The db-xc3-24g4xg.dts board doesn't have an ECC chip for it's DDR but it > can use the L2 cache parity and ecc support. > > Chris Packham (3): > ARM: dts: armada-xp: enable L2 cache parity and ecc on db-xc3-24g4xg > ARM: dts: mvebu: add sdram controller node to Armada-38x > ARM: dts: armada-xp: add label to sdram-controller node
Series applied on mvebu/dt
Thanks,
Gregory
> > arch/arm/boot/dts/armada-38x.dtsi | 5 +++++ > arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 2 +- > arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 5 +++++ > arch/arm/boot/dts/armada-xp.dtsi | 2 +- > 4 files changed, 12 insertions(+), 2 deletions(-) > > -- > 2.23.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
| |