lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 8/8] dt-bindings: Add max12xx SPI ADC series as trivial devices
Date
Update the compatible list with three Maxim ADCs compatibles.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
.../bindings/iio/adc/max1027-adc.txt | 28 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 6 ++++
2 files changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/max1027-adc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
new file mode 100644
index 000000000000..1b703a01d882
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
@@ -0,0 +1,28 @@
+* Maxim 1027/1029/1031/1227/1229/1231 Analog to Digital Converter (ADC)
+
+Required properties:
+ - compatible: Should be one of:
+ * "maxim,max1027"
+ * "maxim,max1029"
+ * "maxim,max1031"
+ * "maxim,max1227"
+ * "maxim,max1229"
+ * "maxim,max1231"
+ - reg: SPI chip select number for the device
+
+Optional properties:
+ - interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+ compatible = "maxim,max1027";
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+ spi-max-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index e0095ecb472f..765fd1c170df 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -120,6 +120,12 @@ properties:
- maxim,max1029
# 10-bit 16 channels 300ks/s SPI ADC with temperature sensor
- maxim,max1031
+ # 12-bit 8 channels 300ks/s SPI ADC with temperature sensor
+ - maxim,max1227
+ # 12-bit 12 channels 300ks/s SPI ADC with temperature sensor
+ - maxim,max1229
+ # 12-bit 16 channels 300ks/s SPI ADC with temperature sensor
+ - maxim,max1231
# Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
- maxim,max1237
# PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
--
2.20.1
\
 
 \ /
  Last update: 2019-10-07 15:28    [W:0.113 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site