Messages in this thread | | | Date | Mon, 7 Oct 2019 11:34:29 +0200 | From | Marco Felsch <> | Subject | Re: [PATCH 1/3] regulator: core: fix boot-on regulators use_count usage |
| |
Hi Doug, Mark,
On 19-10-01 12:57, Doug Anderson wrote: > Hi, > > On Fri, Sep 27, 2019 at 1:47 AM Marco Felsch <m.felsch@pengutronix.de> wrote: > > > > > > It should be possible to do a regulator_disable() though I'm not > > > > > > sure anyone actually uses that. The pattern for a regular > > > > > > consumer should be the normal enable/disable pair to handle > > > > > > shared usage, only an exclusive consumer should be able to use > > > > > > just a straight disable. > > > > In my case it is a regulator-fixed which uses the enable/disable pair. > > But as my descriptions says this will not work currently because boot-on > > marked regulators can't be disabled right now (using the same logic as > > always-on regulators). > > > > > > > Ah, I see, I wasn't aware of the "exclusive" special case! Marco: is > > > > > this working for you? I wonder if we need to match > > > > > "regulator->enable_count" to "rdev->use_count" at the end of > > > > > _regulator_get() in the exclusive case... > > > > So my fix isn't correct to fix this in general? > > I don't think your fix is correct. It sounds as if the intention of > "regulator-boot-on" is to have the OS turn the regulator on at bootup > and it keep an implicit reference until someone explicitly tells the > OS to drop the reference. > > > > > > Yes, I think that case has been missed when adding the enable > > > > counts - I've never actually had a system myself that made any > > > > use of this stuff. It probably needs an audit of the users to > > > > make sure nobody's relying on the current behaviour though I > > > > can't think how they would. > > > > > > Marco: I'm going to assume you'll tackle this since I don't actually > > > have any use cases that need this. > > > > My use case is a simple regulator-fixed which is turned on by the > > bootloader or to be more precise by the pmic-rom. To map that correctly > > I marked this regulator as boot-on. Unfortunately as I pointed out above > > this is handeld the same way as always-on. > > It's a fixed regulator controlled by a GPIO? Presumably the GPIO can > be read. That would mean it ideally shouldn't be using > "regulator-boot-on" since this is _not_ a regulator whose software > state can't be read. Just remove the property.
Sorry that won't fix my problem. If I drop the regulator-boot-on state the fixed-regulator will disable this regulator but disable/enable this regulator is only valid during suspend/resume. I don't say that my fix is correct but we should fix this.
Regards, Marco
> -Doug >
-- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
| |